553765
31
Zoom out
Zoom in
Previous page
1/164
Next page
31
Connecting the AV receiver—Continued
Making HDMI Connections
Video Signals
Digital video signals received by the HDMI IN jacks are normally output by the HDMI MAIN OUT and SUB OUT for
display on your TV. Composite video, S-Video, and component video sources can be upconverted for the HDMI output.
See “Video Connection Formats” on page 32 for more information.
Audio Signals
Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver. Normally, they are not output by the HDMI outputs, unless the “Audio TV Out” setting is set to “On” (see
page 113).
To listen to audio received by the HDMI IN jacks through your TV’s speakers:
Set the “TV Control” setting to “On” (see page 114) for an -compatible TV.
Set the “Audio TV Out” setting to “On” (see page 113) when the TV is not compatible with
or the “TV Control” setting to “Off”.
Set your DVD/BD player’s HDMI audio output setting to PCM.
Notes:
The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can
be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need
to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In
addition, video signals from a PC are not guaranteed.
When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be
seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV
power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound
may be cut off.
When the “Audio TV Out” setting is set to “On” (see page 113) to hear from your TV’s speakers, by controlling the
AV receiver’s volume, the sound will be output from the AV receiver’s speakers, too. When the
TV Control” setting
is set to
On to hear from speakers of -compatible TV, by controlling the AV receiver’s volume, the AV
receiver’s speakers will produce sound while the TV’s speakers are muted. To stop the AV receiver’s speakers pro-
ducing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.
The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the
picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected
component’s instruction manual for details.
Step 1:
Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD/BD player, TV, projec-
tor, and so on.
Step 2:
Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 54).
Hint!
HDMI
IN
HDMI
OUT
TV
DVD/BD player
HD camcorder, etc
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR5007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR5007 in the language / languages: English as an attachment in your email.

The manual is 17,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR5007

Onkyo TX-NR5007 User Manual - German - 328 pages

Onkyo TX-NR5007 User Manual - Dutch - 328 pages

Onkyo TX-NR5007 User Manual - French - 328 pages

Onkyo TX-NR5007 User Manual - Italian - 328 pages

Onkyo TX-NR5007 User Manual - Swedish - 328 pages

Onkyo TX-NR5007 User Manual - Spanish - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info