492644
50
Zoom out
Zoom in
Previous page
1/128
Next page
Advanced Operations
En-50
Audio Return Ch (ARC)
` Off
` Auto:
The audio signal from your TV tuner can be sent to
the HDMI OUT of the AV receiver.
The audio return channel (ARC) function allows an ARC
capable TV to send the audio stream to the HDMI OUT of
the AV receiver. To use this function, you must select the
TV/CD input selector and your TV must be ARC capable.
The ARC indicator will light when the audio signal is
detected.
Note
This setting is fixed to “----” when the “HDMI Ctrl (RIHD)
setting is set to “Off”.
This setting is set to “Auto” automatically when the “HDMI Ctrl
(RIHD)” setting is set to “On” for the first time.
If you set “Audio Return Ch” to “Auto”, the “Audio Selector
settings of the TV/CD input selector will be automatically
switched to “ARC” ( page 47).
LipSync
` Off
` On
This function allows the AV receiver to automatically
correct any delay between the video and the audio, based
on the data from the connected monitor.
Note
This function works only if your HDMI-compatible TV supports
HDMI Lip Sync.
InstaPrevue
These settings apply to “InstaPrevue” of the Home menu
( page 35) and specify the preview display of HDMI
video streams.
Sub Window
` Multi
:
Displays preview thumbnails all at once.
` Single:
Displays preview thumbnails one-by-one.
With this setting, you can set the number of preview
thumbnails displayed.
Position
(with “Sub Window” set to “Multi”)
` Top, Bottom
, Left, Right
(with “Sub Window” set to “Single”)
` UpperL, UpperR, LowerL, LowerR
With this setting, you can set the position of preview
thumbnails on the TV screen.
Menu Network Setup
This section explains how to configure the AV receiver’s
network settings manually.
If your router’s DHCP server is enabled, you don’t need to
change any of these settings, as the AV receiver is set to
use DHCP to configure itself automatically by default (i.e.,
DHCP is set to “Enable”). If, however, your router’s
DHCP server is disabled (you’re for example using static
IP), you’ll need to configure these settings yourself, in
which case, a knowledge of Ethernet networking is
essential.
What’s DHCP?
DHCP (Dynamic Host Configuration Protocol) is used by
routers, computers, the AV receiver, and other devices to
automatically configure themselves on a network.
What’s DNS?
The DNS (Domain Name System) translates domain
names into IP addresses. For example, when you enter a
domain name such as www.onkyousa.com in your Web
browser, before accessing the site, your browser uses DNS
to translate this into an IP address, in this case
63.148.251.142.
MAC Address
This is the AV receiver’s MAC (Media Access Control)
address. This address cannot be changed.
After changing the settings of the “HDMI Ctrl
(RIHD)”, “HDMI Through” or “Audio Return Ch”,
turn off the power on all connected pieces of equipment
and then turn them on again. Refer to the user’s manuals
for all connected pieces of equipment.
Network Setup
After modifying the network settings, you must confirm
the changes by executing “Save”.
1 2 3 4 5
Setup
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR414 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR414

Onkyo TX-NR414 Quick start guide - English - 4 pages

Onkyo TX-NR414 Quick start guide - German - 4 pages

Onkyo TX-NR414 User Manual - German - 124 pages

Onkyo TX-NR414 Quick start guide - Dutch - 4 pages

Onkyo TX-NR414 User Manual - Dutch - 124 pages

Onkyo TX-NR414 User Manual - French - 4 pages

Onkyo TX-NR414 User Manual - French - 128 pages

Onkyo TX-NR414 User Manual - Italian - 4 pages

Onkyo TX-NR414 User Manual - Italian - 124 pages

Onkyo TX-NR414 User Manual - Swedish - 4 pages

Onkyo TX-NR414 User Manual - Swedish - 124 pages

Onkyo TX-NR414 User Manual - Spanish - 4 pages

Onkyo TX-NR414 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info