492644
40
Zoom out
Zoom in
Previous page
1/128
Next page
Advanced Operations
En-40
You can change various audio settings from the Quick
Setup ( page 39).
Note
These settings are not available in either of the following cases:
–TheAudio TV Out” setting is set to On” ( page 49).
–“HDMI Ctrl (RIHD)” is set to “On” ( page 49) and you’re
listening through your TV speakers.
Tone Control
Bass
` –10 dB to 0dB
to +10 dB in 2 dB steps
You can boost or cut low-frequency sounds output
from the front speakers.
Treble
` –10 dB to 0dB
to +10 dB in 2 dB steps
You can boost or cut high-frequency sounds output
from the front speakers.
You can adjust the bass and treble for the front speakers,
except when Direct or Pure Audio (European, Australian
and Asian models) listening mode is selected.
Operating on the AV receiver
Speaker Levels
Subwoofer Level
` –15 dB to 0dB
to +12 dB in 1 dB steps
Center Level
` –12 dB to 0dB to +12 dB in 1 dB steps
You can adjust the volume of each speaker while listening
to an input source.
These temporary adjustments are cancelled when the AV
receiver is set to standby. To save the setting you made
here, go to “Level Cal (Level Calibration)” ( page 45)
before setting the AV receiver to standby.
Note
You cannot use these function while the AV receiver is muted.
These settings cannot be used while a pair of headphones is
connected.
Speakers that are set to “No” or “None” in “Sp Config (Speaker
Configuration)” ( page 44) cannot be adjusted.
Late Night
Late Night
For Dolby Digital and Dolby Digital Plus sources, the
options are:
` Off
` Low:
Small reduction in dynamic range.
` High:
Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
` Auto
:
The Late Night function is set to “On” or “Off
automatically.
` Off
` On
Turn this setting on to reduce the dynamic range of Dolby
Digital material so that you can still hear quiet parts even
when listening at low volume levels—ideal for watching
movies late at night when you don’t want to disturb
anyone.
Note
The effect of the Late Night function depends on the material that
you are playing and the intention of the original sound designer,
and with some material there will be little or no effect when you
select the different options.
The Late Night function can be used only when the input source
is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
The Late Night function is set to “Off” when the AV receiver is
set to standby. For Dolby TrueHD sources, it will be set to
Auto”.
Music Optimizer
Music Optimizer
` Off
` On
The Music Optimizer function enhances the sound quality
of compressed music files. When set to “On”, the M.Opt
indicator lights on the AV receiver’s display, and the
MUSIC OPTIMIZER indicator (North American and
Taiwanese models) lights on the front panel.
Tip
(North American and Taiwanese models) Alternatively, you
can use the AV receiver’s MUSIC OPTIMIZER.
Note
The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and analog
audio input signals.
The Music Optimizer is disabled when the Direct or Pure Audio
(European, Australian and Asian models) listening mode is
selected.
The setting is stored individually for each input selector.
Using the Audio Settings of Quick
Setup
1
Press TONE repeatedly to select either “Bass” or
“Treble”.
2
Use and + to adjust.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR414 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR414

Onkyo TX-NR414 Quick start guide - English - 4 pages

Onkyo TX-NR414 Quick start guide - German - 4 pages

Onkyo TX-NR414 User Manual - German - 124 pages

Onkyo TX-NR414 Quick start guide - Dutch - 4 pages

Onkyo TX-NR414 User Manual - Dutch - 124 pages

Onkyo TX-NR414 User Manual - French - 4 pages

Onkyo TX-NR414 User Manual - French - 128 pages

Onkyo TX-NR414 User Manual - Italian - 4 pages

Onkyo TX-NR414 User Manual - Italian - 124 pages

Onkyo TX-NR414 User Manual - Swedish - 4 pages

Onkyo TX-NR414 User Manual - Swedish - 124 pages

Onkyo TX-NR414 User Manual - Spanish - 4 pages

Onkyo TX-NR414 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info