492661
105
Zoom out
Zoom in
Previous page
1/168
Next page
Appendix
En-105
There’s no sound
The Zone 2/3 speakers produce no sound
Can’t access the server or Internet radio
Playback stops while listening to music files on
the server
Can’t connect to the AV receiver from a Web
browser
Can’t access the music files on a USB device
Standby power consumption
The sound changes when I connect my
headphones
The speaker distance cannot be set as required
The display doesn’t work
How do I change the language of a multiplex
source
The u functions don’t work
The functions System Off/Auto Power On and
Direct Change don’t work for components
connected via u
Zone 2/3
Only components connected to analog or HDMI (2ch
PCM) inputs can be played in Zone 2.
Only components connected to analog inputs can be
played in Zone 3.
See “Multi Zone” for the conditions in which
Powered Zone 2/3 cannot be used.
87
To use the Zone 2 speakers, you must set the
Powered Zone 2” setting to “Yes”.
66
To use the Zone 3 speakers, you must set the
Powered Zone 3” setting to “Yes”.
66
Music Server and Internet Radio
Check the network connection between the AV
receiver and your router or switch.
118
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
Make sure the server is up and running and
compatible with the AV receiver.
119
Check the “Network”settings. 85
Make sure your server is compatible with the AV
receiver.
119
If you download or copy large files on your
computer, playback may be interrupted. Try closing
any unused programs, use a more powerful computer,
or use a dedicated server.
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be interrupted.
Reduce the number of playback devices on the
network, upgrade your network, or use a switch
instead of a hub.
If you’re using DHCP, your router may not always
allocate the same IP address to the AV receiver, so if
you find that you can’t connect to a server or Internet
radio station, recheck the AV receiver’s IP address on
the “Network” screen.
85
Check the “Network” settings. 85
USB Device Playback
Make sure the USB device is plugged in properly.
The AV receiver supports USB devices that support
the USB mass storage device class. However,
playback may not be possible with some USB devices
even if they conform to the USB mass storage device
class.
119
USB memory devices with security functions cannot
be played.
Others
In the following cases, the power consumption in
standby mode may reach up to a maximum of
12.5 W:
–TheHDMI Control(RIHD)” setting is set to
On”. (Depending on the TV status, the AV
receiver will enter standby mode as usual.)
–TheHDMI Through” setting is set to other than
Off”.
–TheNetwork Standby” setting is set to “On”.
83, 84,
86
If an MHL-enabled mobile device is connected to the
AUX (front) input, the power consumption in standby
mode will increase.
21
When a pair of headphones is connected, the listening
mode is set to Stereo, unless it’s already set to Stereo,
Mono, Direct, or Pure Audio.
The values entered may be automatically adjusted
with values best-suited for your home theater.
The display is turned off when the Pure Audio
listening mode is selected.
Use the “Multiplex” setting in the “Audio Adjust
menu to select “Main” or “Sub”.
72
To use u, you must make an u connection and an
analog audio connection (RCA) between the
component and AV receiver, even if they are
connected digitally.
25
While Zone 2/3 is selected, the u functions don’t
work.
25
These functions don’t work when Zone 2/3 is turned
on.
25
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR3010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR3010

Onkyo TX-NR3010 User Manual - German - 168 pages

Onkyo TX-NR3010 User Manual - Dutch - 168 pages

Onkyo TX-NR3010 User Manual - French - 168 pages

Onkyo TX-NR3010 User Manual - Italian - 168 pages

Onkyo TX-NR3010 User Manual - Swedish - 168 pages

Onkyo TX-NR3010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info