492661
55
Zoom out
Zoom in
Previous page
1/168
Next page
Turning On & Basic Operations
En-55
The Whole House Mode is useful when you want to add
extra background music to your home party; this allows
you to enjoy the same stereo music as the main room in
separate rooms (Zone 2/3).
The Whole House Mode selects the same input source for
Multi Zone as the main room’s.
See also:
“Speaker Setup” ( page 66)
“Multi Zone” ( page 87)
You can set which speakers you want to use by priority.
You can temporarily mute the output of the AV receiver.
Using the Whole House Mode
1
Press WHOLE HOUSE MODE on the front panel.
To cancel the Whole House Mode, change the input
source for the main room or select a listening mode
( page 45).
Note
The Whole House Mode only supports analog audio.
To adjust the volume of Multi Zone, switch the AV receiver
to Multi Zone control. See “Adjusting the Volume for
Zones” ( page 89) for the volume adjustment of Multi
Zone.
The Whole House Mode is not available in the following
cases:
–TheAudio TV Out” setting is set to “On
( page 84).
–“HDMI Control(RIHD)” is set to “On” ( page 83)
and you’re listening through your TV speakers.
Digital Processing Crossover Network is used
( page 71).
Selecting Speaker Layout
1
Press RECEIVER followed by SP (speaker layout)
repeatedly to select:
9.2 ch playback
` Speaker Layout:SB/FH:
The sounds from surround back and front high
speakers are output by priority.
` Speaker Layout:SB/FW:
The sounds from surround back and front wide
speakers are output by priority.
` Speaker Layout:FH/FW:
The sounds from front high and front wide
speakers are output by priority.
Note
This setting is not available in either of the following cases:
–TheSpeakers Type(Front A)” setting is set to
Bi-Amp” or “Digital Crossover”.
Speakers B is being used.
–ThePowered Zone 2/3” setting is set to “Yes” and
Zone 2/3 is turned on.
Playback conditions may be limited depending on the set-
tings in “Speaker Settings” ( page 66) and “Speaker
Configuration” ( page 67).
When a listening mode which doesn’t support front high,
front wide or surround back speakers is used, this setting
cannot be selected.
Important:
The following layouts are only available when the “11ch
Playback” is set to “No” ( page 66) and all
corresponding speakers are enabled.
Speakers A or Speakers B Configuration
When “Speakers Type(Front B)” setting is set to
other than “No”, the relevant speaker indicator
lights (A or B), and you can choose a speaker layout
between Speakers A and Speakers B. Speakers A or
B can be switched regardless of listening modes.
Note
When using Speakers B, you cannot use front wide
speakers.
While using Speakers B, you cannot use
Audyssey MultEQ
®
XT32 Room Correction and Speaker
Setup, as well as Audyssey Dynamic EQ
®
and
Audyssey Dynamic Volume
®
.
Muting the AV Receiver
1
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver’s display.
Tip
To unmute, press MUTING again or adjust the volume.
Muting is automatically cancelled when the AV receiver is
set to standby.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR3010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR3010

Onkyo TX-NR3010 User Manual - German - 168 pages

Onkyo TX-NR3010 User Manual - Dutch - 168 pages

Onkyo TX-NR3010 User Manual - French - 168 pages

Onkyo TX-NR3010 User Manual - Italian - 168 pages

Onkyo TX-NR3010 User Manual - Swedish - 168 pages

Onkyo TX-NR3010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info