553767
32
Zoom out
Zoom in
Previous page
1/116
Next page
32
En
Turning Off the Components
*2
When the last-pressed ACTIVITIES is MY MUSIC, the TV
will not turn off.
Changing the Playback Components
Assigned to ACTIVITIES
You can change the playback components assigned to the
ACTIVITIES of Easy Macro mode using the following
procedure.
Restoring Default
With the supplied calibrated microphone,
Audyssey MultEQ XT32 automatically determines the
number of speakers connected, their size for purposes of
bass management, optimum crossover frequencies to the
subwoofer (if present), and distances from the primary lis-
tening position.
Audyssey MultEQ XT32 then removes the distortion
caused by room acoustics by capturing room acoustical
problems over the listening area in both the frequency and
time domain. The result is clear, well-balanced sound for
everyone. Enabling Audyssey MultEQ XT32 allows you
to also use Audyssey Dynamic EQ
®
, which maintains the
proper octave-to-octave balance at any volume level
( 57).
Before using this function, connect and position all of
your speakers.
If “Dynamic EQ” is set to “On” ( 57), the “Equalizer
setting will be set to “Audyssey” ( 53). On the other
hand, if it is set to “Off”, the “Dynamic Volume” setting
will be set to “Off” ( 58).
It takes about 30 minutes to complete
Audyssey MultEQ XT32 Room Correction and Speaker
Setup for 8 positions. Total measurement time varies
depending on the number of speakers.
Note
If any of your speakers is 4 ohms, change
Speaker Impedance” setting ( 51) before running
Audyssey MultEQ XT32 Room Correction and Speaker
Setup.
Using Audyssey MultEQ XT32
Using Audyssey MultEQ XT32 to create a listening envi-
ronment in your home theater that all listeners will enjoy,
Audyssey MultEQ XT32 takes measurements at up to
8 positions within the listening area. Position the micro-
phone at ear height of a seated listener with the micro-
phone tip pointed directly at the ceiling using a tripod. Do
not hold the microphone in your hand during measure-
ments as this will produce inaccurate results.
First measurement position
Also referred to as the Main Listening Position this
refers to the most central position where one would nor-
mally sit within the listening environment.
MultEQ XT32 uses the measurements from this posi-
tion to calculate speaker distance, level, polarity, and the
optimum crossover value for the subwoofer.
Second
Eighth measurement positions
These are the other listening positions (i.e., the places
where the other listeners will sit). You can measure up
to 8 positions.
The following examples show some typical home theater
seating arrangements. Choose the one that best matches
yours, and position the microphone accordingly when
prompted.
Press ALL OFF.
The playback component assigned to the last-
pressed ACTIVITIES, the AV receiver, and the TV
turn off.
*2
While holding down REMOTE MODE for the rel-
evant playback component, press and hold down
ACTIVITIES to which you wish to assign this com-
ponent for about 3 seconds.
ACTIVITIES will flash twice, indicating that the
change is complete.
Examples:
If you wished to use MY MOVIE to start the play-
back component assigned to VCR/DVR of
REMOTE MODE, you would press and hold down
MY MOVIE for about 3 seconds while pressing
down VCR/DVR of REMOTE MODE.
Tip
This procedure can also be performed via onscreen menu
( 96).
1
While holding down HOME, press and hold down
ALL OFF until ALL OFF lights (about 3 seconds).
2
Release HOME and ALL OFF and press ALL OFF
again.
ALL OFF flashes twice.
Audyssey MultEQ
®
XT32 Room
Correction and Speaker Setup
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR3008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR3008 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR3008

Onkyo TX-NR3008 User Manual - German - 228 pages

Onkyo TX-NR3008 User Manual - Dutch - 228 pages

Onkyo TX-NR3008 User Manual - French - 232 pages

Onkyo TX-NR3008 User Manual - Italian - 228 pages

Onkyo TX-NR3008 User Manual - Swedish - 228 pages

Onkyo TX-NR3008 User Manual - Spanish - 232 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info