462084
68
Zoom out
Zoom in
Previous page
1/100
Next page
68
En
Adjusting the Volume for Zones
Operating on the remote controller
Operating on the AV receiver
If your Zone 2/3 speakers are connected to a receiver or
integrated amp in Zone 2/3, use its volume control to
adjust the volume.
Muting Zones
Operating on the remote controller
Tip
To unmute, press ZONE followed by MUTING again. Zones
can also be unmuted by adjusting the volume.
Adjusting the Tone and Balance of Zone 2
Note
Only analog input sources are output by the ZONE 2/3
PRE/LINE OUT and FRONT WIDE/ZONE 2 L/R, FRONT
HIGH/ZONE 3 L/R terminals. Digital input sources are not
output. If no sound is heard when an input source is selected,
verify that the source is connected to an analog input.
While Zone 2/3 is on, u functions will not work.
You cannot select different AM or FM radio stations for your
main room and Zone 2/3. The same AM/FM radio station will be
heard in each room. Namely, if you have selected an FM station
for the main room, that station will also be output in Zone 2/3.
When you have selected NET or USB as the input selector, the
last selector selected will be set for Main room, Zone 2, and
Zone 3.
When Zone 2/3 is activated and its input selector is selected, the
power consumption of standby mode slightly increases.
When setting the AV receiver to standby mode while Zone 2/3
is active, the Z2/3 indicator is dimly lit.
Activating Zones in the main room when the listening mode is
set to Pure Audio will automatically switch it to Direct.
When Powered Zone 3 is used, playback in the main room is
reduced to 5.1 channels.
The Zone 2 volume, tone, and balance function have no effect on
ZONE 2 PRE/LINE OUT when the “Zone2 Out” setting is set
to “Fixed” ( page 60).
The Zone 3 volume function has no effect on ZONE 3
PRE/LINE OUT when the “Zone3 Out” setting is set to
Fixed” ( page 60).
Even if you repeatedly press the remote controller’s ZONE to
select zones, the last zone selection will be retained once you
have switched to other components by pressing other REMOTE
MODE after pressing ZONE.
1
press ZONE repeatedly.
2
Use VOL q/w to adjust the volume.
1
Press ZONE 2 or ZONE 3 (the Z2/3 indicator on
the display flash).
2
Use MASTER VOLUME control within 8 seconds
to adjust the volume.
1
Press ZONE repeatedly, and then press MUTING.
1
On the AV receiver, press ZONE 2.
2
Press the AV receiver’s TONE repeatedly to select
“Bass”, “Treble” or “Balance”.
3
Use –/+ to adjust the bass, treble or balance.
You can boost or cut the bass or treble from –10 dB
to +10 dB in 2 dB steps.
• You can adjust the balance from 0 in the center to
+10 dB to the right or +10 dB to the left in 2 dB
steps.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR1009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1009 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1009

Onkyo TX-NR1009 Quick start guide - English - 2 pages

Onkyo TX-NR1009 User Manual - German - 196 pages

Onkyo TX-NR1009 User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info