Manual Onkyo TX-NR1009 (page 64 of 100) (English)

462084

Zoom out

Zoom in

1/100

Speaker Levels

■ Subwoofer Level

` –15.0dB to 0.0dB

to +12.0dB in 0.5 dB steps.

■ Center Level

` –12.0dB to 0.0dB

to +12.0dB in 0.5 dB steps.

You can adjust the volume of each speaker while listening

to an input source.

These temporary adjustments are cancelled when the AV

receiver is set to standby. To save the setting you made

here, go to “Level Calibration” (➔ page 49) before

setting the AV receiver to standby.

Note

• You cannot use this function while the AV receiver is muted.

• Speakers that are set to “No” or “None” in

“Speaker Configuration” (➔ page 48) cannot be adjusted.

Dolby Volume

■ Dolby Volume

See “Dolby Volume” of “Audio Adjust” (➔ page 52).

Note

• This setting cannot be used in either of the following cases:

– Pure Audio or Direct listening mode is selected.

– the multichannel analog input is selected.

– any of the THX listening modes is selected, with “Loudness

Plus” set to “On” or “Preserve THX Settings” set to “Yes”

(➔ page 50).

• When “Dolby Volume” is set to “On”, the “Dynamic EQ” and

“Dynamic Volume” settings of all input selectors are switched

to “Off”.

Audyssey

■ Audyssey

See “Audyssey” in “Source Setup” (➔ page 53).

■ Dynamic EQ

See “Dynamic EQ” in “Source Setup” (➔ page 53).

■ Dynamic Volume

See “Dynamic Volume” in “Source Setup” (➔ page 53).

Note

• These technologies can be used when all the following

conditions are met:

– Room Correction and Speaker Setup is completed. Note that

“Audyssey” requires the “Audyssey MultEQ XT Full

Calibration” method.

– Any listening mode other than Direct or Pure Audio is

selected.

– A pair of headphones is not connected.

– multichannel analog input is not selected.

• The setting is stored individually for each input selector.

•“Dynamic EQ” and “Dynamic Volume” cannot be selected

when any of the THX listening modes is selected, with

“Loudness Plus” set to “On” or “Preserve THX Settings” set

to “Yes” (➔ page 50).

•When “Dynamic EQ” is set to “On” or “Dynamic Volume” is

set to anything else than “Off”, “Dolby Volume” will be

switched to “Off”.

Late Night

■ Late Night

For Dolby Digital and Dolby Digital Plus sources, the

options are:

` Off

` Low:

Small reduction in dynamic range.

` High:

Large reduction in dynamic range.

For Dolby TrueHD sources, the options are:

` Auto

The Late Night function is set to “On” or “Off”

automatically.

` Off

` On

Turn this setting on to reduce the dynamic range of Dolby

Digital material so that you can still hear quiet parts even

when listening at low volume levels—ideal for watching

movies late at night when you don’t want to disturb

anyone.

Note

• The effect of the Late Night function depends on the material

that you are playing and the intention of the original sound

designer, and with some material there will be little or no effect

when you select the different options.

• The Late Night function can be used only when the input source

is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.

• The Late Night function is set to “Off” when the AV receiver is

set to standby. For Dolby TrueHD sources, it will be set to

“Auto”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1009 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1009

Onkyo TX-NR1009 Quick start guide - English - 2 pages

Onkyo TX-NR1009 User Manual - German - 196 pages

Onkyo TX-NR1009 User Manual - Dutch - 196 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-NR1009 Manual

Product: