462084
49
Zoom out
Zoom in
Previous page
1/100
Next page
49
En
Wireless Subwoofer
` Yes:
The audio is output from the speakers connected to
the wireless unit.
` No
:
The audio is not output from the speakers connected
to the wireless unit.
When the wireless unit is connected to the UNIVERSAL
PORT jack on the AV receiver, you can select if you wish
to output the audio from the speakers connected to the
wireless unit.
Note
•If theSubwoofer” setting is set to “No”, this setting cannot be
selected ( page 48).
Speaker Distance
Here you can specify the distance from each speaker to the
listening position so that the sound from each speaker
arrives at the listener’s ears as the sound designer
intended.
Unit
` feet:
Distances can be set in feet. Range: 0.5ft to 30.0ft in
0.5 foot steps.
` meters:
Distances can be set in meters. Range: 0.15m to
9.00m in 0.15 meter steps.
(The default setting varies from country to country.)
Left, Front Wide Left, Front High Left, Center,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right,
Surround Back Left, Surround Left, Subwoofer
` Specify the distance from each speaker to your
listening position.
Note
These settings are not available in either of the following cases:
a pair of headphones is connected.
–theAudio TV Out” setting is set to On” ( page 61).
–“HDMI Control(RIHD)” is set to “On” ( page 60) and
you’re listening through your TV speakers.
Speakers that you set to “No” or “None” in the
“Speaker Configuration” cannot be selected ( page 48).
Level Calibration
Here you can adjust the level of each speaker with the
built-in test tone so that the volume of each speaker is the
same at the listening position.
Left, Front Wide Left, Front High Left, Center
*1
,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right,
Surround Back Left, Surround Left
` –12.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
Subwoofer
*1
` –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
Note
These settings cannot be calibrated in either of the following
cases:
a pair of headphones is connected.
–theAudio TV Out” setting is set to “On” ( page 61).
–“HDMI Control(RIHD)” is set to “On” ( page 60) and
you’re listening through your TV speakers.
the AV receiver is muted.
Speakers that you set to “No” or “None” in the
“Speaker Configuration” cannot be selected ( page 48).
The test tone is output at the standard level for THX, which is
0 dB (absolute volume setting 82). If you normally listen at
volume settings below this, be careful because the test tone will
be much louder.
*1
For the center speaker and subwoofer, the level settings made
by using the Home menu are saved in this menu
( page 40).
Tip
If you’re using a handheld sound level meter, adjust the level of
each speaker so that it reads 75 dB SPL at the listening position,
measured with C-weighting and slow reading.
When an optional unit is connected to the
UNIVERSAL PORT jack on the AV receiver, the
speaker setting menu may appear on screen.
This setting is set automatically by
Audyssey MultEQ
®
XT Room Correction and Speaker
Setup function ( page 31).
This setting is set automatically by
Audyssey MultEQ XT Room Correction and Speaker
Setup function ( page 31).
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR1009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR1009 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR1009

Onkyo TX-NR1009 Quick start guide - English - 2 pages

Onkyo TX-NR1009 User Manual - German - 196 pages

Onkyo TX-NR1009 User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info