492647
47
Zoom out
Zoom in
Previous page
1/148
Next page
Turning On & Basic Operations
En-47
You can set which speakers you want to use by priority.
Note
This setting is not available in either of the following cases:
–TheSpeakers Type(Front)” setting is set to “Bi-Amp”.
–ThePowered Zone 2/3” setting is set to “Yes” and Zone 2/3
is turned on.
Playback conditions may be limited depending on the settings in
“Speaker Settings” ( page 55) and
“Speaker Configuration”( page 55).
When a listening mode which doesn’t support front high, front
wide or surround back speakers is used, this setting cannot be
selected.
The Whole House Mode is useful when you want to add
extra background music to your home party; this allows
you to enjoy the same stereo music as the main room in
separate rooms (Zone 2/3).
The Whole House Mode selects the same input source for
Multi Zone as the main room’s.
See also:
“Speaker Setup” ( page 55)
“Multi Zone” ( page 70)
You can temporarily mute the output of the AV receiver.
Selecting Speaker Layout
1
Press RECEIVER followed by SP (speaker layout)
repeatedly to select:
` Speaker Layout:FH:
The sound from front high speakers is output by
priority.
` Speaker Layout:FW:
The sound from front wide speakers is output by
priority.
` Speaker Layout:SB:
The sound from surround back speakers is
output by priority.
Using the Whole House Mode
1
While holding down ZONE 2, press ZONE 3 on the
front panel.
To cancel the Whole House Mode, change the input
source for the main room or select a listening mode
( page 38).
Note
The Whole House Mode only supports analog audio.
To adjust the volume of Multi Zone, switch the AV receiver
to Multi Zone control. See “Adjusting the Volume for
Zones” ( page 71) for the volume adjustment of Multi
Zone.
The Whole House Mode is not available in either of the
following cases:
–TheAudio TV Out” setting is set to “On
( page 67).
–“HDMI Control(RIHD)” is set to “On” ( page 67)
and you’re listening through your TV speakers.
Muting the AV Receiver
1
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver’s display.
Tip
To unmute, press MUTING again or adjust the volume.
Muting is automatically cancelled when the AV receiver is
set to standby.
Using Headphones
1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the PHONES
jack.
While the headphones plug is inserted in the PHONES
jack, = indicator lights.
Note
Always turn down the volume before connecting your
headphones.
While the headphones plug is inserted in the PHONES
jack, the speakers are turned off. (The Powered Zone 2/3
speakers are not turned off.)
When you connect a pair of headphones, the listening mode
is set to Stereo, unless it’s already set to Stereo, Mono,
Direct, or Pure Audio.
If you connect an iPod or iPhone to the USB port on the AV
receiver, no sound will be output from the headphones jack.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR 717 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR 717 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR 717

Onkyo TX-NR 717 User Manual - German - 144 pages

Onkyo TX-NR 717 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info