553759
15
Zoom out
Zoom in
Previous page
1/76
Next page
15
VIDEO IN/OUT
These are the video inputs and outputs. There are 6 video inputs
and 2 video outputs and each one includes both composite video
and S-video configurations. Connect VCRs, LD players, DVD
players, and other video components to the video inputs. S-video
sources can be viewed via the S-video or composite outputs, while
composite sources can only be viewed through the composite
output.
The 2 video output channels can be used to be connected to video
tape recorders for making recordings.
Composite
video jack
S video jack
Ex: Onkyo CD player
Ex: Onkyo cassette tape deck
When connecting a VCR or other video component, make sure
you connect the audio and video leads together (i.e., both to
VIDEO 3).
With LD players that have an AC-3RF terminal, connect the
video source to the video inputs of VIDEO 4 because only it
supports the AC-3RF settings during digital setup.
ZONE 2
These are the audio and video output jacks for the remote zone
(Zone 2). Use these outputs to connect the remote zone. For the
connection procedure, refer to Setting up the remote zone on
page 24. These outputs are activated by the Zone 2 button on the
front panel.
SPEAKERS
Seven terminals are provided for the front left, front right, front
center, surround left, surround right, surround back left, and
surround back right speakers. In addition to being able to
reproduce the conventional 5.1-channel source input, outputs for
surround back left and surround back right speakers have been
added for support of the state-of-the-art THX Surround EX.
Speaker outputs are compatible with banana plug connectors .
z (RI)
By connecting the z connector as shown in the diagram below,
you can use the RC-390M remote controller to operate Onkyo
cassette tape decks and compact disc players that also have
Onkyos z connectors. Simply connect a remote control cable
from this connector to the z connector of the cassette tape deck
or compact disc player. An z remote control cable with a 3.5-
mm (1/8-inch) miniature two-conductor plug comes with every
cassette tape deck and compact disc player that has an z
connector.
Rear panel facilities
For remote control operation, the audio connection cables
must also be connected.
The RC-390M remote controller does not support turntables.
If the connected component has two RI connectors, you can
use either one to connect to the TX-DS989. The other one can
be used to daisy chain with another component.
For Onkyo DVD or MD players, you can control them by
simply pointing the RC-390M controller directly at the
component.
IR IN MAIN
If the TX-DS989 is located inside a rack or cabinet that will not
allow infrared beams to reach the IR sensor, you will need to
connect a remote sensor* to this input to be able to use the remote
controller. Then install the remote sensor in an unblocked location
where you can easily point the remote controller.
* An optional remote sensor kit is required.
IR IN ZONE 2
This jack allows you to connect a multiroom system kit so that you
can use the remote controller while you are in the remote zone
(Zone 2), which may be far separated from the TX-DS989.
* To be able to use the remote controller in the remote zone
(Zone 2), you must connect one of the following (sold
separately):
Onkyos Multi-Room System Kit (IR Remote Controller
Extension System).
A multiroom A/V distribution and control system from Niles
®
,
Xantech
®
, or the like
TX-DS989
z connector
z connector
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS989 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS989 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info