553756
71
Zoom out
Zoom in
Previous page
1/76
Next page
71
FM/AM TUNER
AM stations cannot be received.
AM loop antenna is not connected.
Connect the included AM loop antenna to the AM antenna
terminals.
Buzzing noise on AM stations (particularly
noticeable at night or with weak stations).
Noise from electrical apparatus such as fluorescent lamp.
Move the AM loop antenna to different position.
Set up an outdoor AM antenna.
Noise is heard at high-pitched sounds on AM
stations.
Noise from TV set.
Place the AM loop antenna as far as possible from the TV.
Move unit away from TV set.
Crackling noise on both AM and FM stations.
Noise caused by fluorescent lamp being turned on and off.
Move antenna as far as possible from the fluorescent lamp.
Noise from automobile ignition.
Install an FM outdoor antenna as far as possible from the
road.
Change the position or direction of the outdoor antenna.
The indicators light for stereo reception, but
sound is distorted and stereo separation is bad.
Station is too strong.
Change to FM indoor antenna.
Multiple reflection of the radio waves because of tall buildings
or mountains.
Use antenna that has better directivity and select a point
where distortion is least.
Indicators for stereo reception flicker and hiss is
heard on FM stations.
Station is too weak.
Install an outdoor FM antenna.
Stereo FM broadcasts cover only about half the distance of an
ordinary broadcast.
Change the position or direction of the outdoor antenna.
No preset station is recalled.
Power cord has been unplugged or the POWER switch has
been turned off for a long time.
The memory contents are lost. Store all stations again.
VIDEO and AUDIO
Desired picture does not appear.
Improper connection.
Check the connection again. Insert the plugs and
connectors completely.
Video Setup sub-menu of Input Setup menu settings are
incorrect.
Check Settings.
No OSD Menu display.
Improper connection.
Check connections.
OSD Menu is displayed when monitor is connected to VIDEO
or S VIDEO of MONITOR OUT.
Confirm connections.
Monitor is connected to MONITOR OUT VIDEO when the
OSD output is set to S Video or monitor is connected to
MONITOR OUT S VIDEO when the OSD output is set to
Video.
Check the OSD Config sub-menu of OSD Setup (page 29).
Picture and sound do not match.
Improper connection.
Check connections.
Video Setup sub-menu of Input Setup menu settings are
incorrect.
Check settings.
No sound, or sound of the selected source is not
heard.
Digital Setup sub-menu of Input Setup menu settings are
incorrect.
Check settings.
No picture appears on the TV screen (or monitor).
TV (or monitor) is not set to receive the output signals from the
receiver.
Set the TV (or monitor) to the receiver input.
Video cable is not connected securely.
Check connections.
S VIDEO IN signal is output at VIDEO OUT and S VIDEO
OUT, but VIDEO IN signal is only output at VIDEO OUT.
Also, COMPONENT VIDEO IN signal is only output at
COMPONENT VIDEO OUT.
Check the input and output signals.
Troubleshooting guide
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS787 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS787 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS787

Onkyo TX-DS787 User Manual - French - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info