553754
59
Zoom out
Zoom in
Previous page
1/64
Next page
59
Also refer to the respective instruction manuals of the video disc player, video cassette recorder, TV monitor, etc., that compose your
entertainment system.
Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity. If this
happens, press the POWER switch on the unit and then press it in again after about five seconds.
Troubleshooting guide
Trouble
FM/AM
TUNED and STEREO
indicators light but
sound is distorted and
stereo separation is bad.
TUNED and STEREO
indicators flicker and
hiss is heard on FM.
No station is recalled.
Video & audio
Desired picture does
not appear when
MULTI CH INPUT but-
ton is pressed.
No on-screen display.
Picture and sound do not
match.
No sound, or sound of
the selected source is
not heard.
No picture appears on
the TV screen (or moni-
tor).
Others
LATE NIGHT function
cannot be used.
LFE LEVEL function
cannot be used.
Cinema Re-EQ function
cannot be used.
Parameter cannot be set
for Front Effect, Reflect
Level, Reverb Level,
Room Size, etc.
Front panel controls
function but remote
controller does not.
Cause
Station is too strong.
Multiple reflection of the radio waves because
of tall buildings or mountains.
Station is too weak.
Stereo FM broadcasts cover only about half the
distance of an ordinary broadcast.
The power cord has been unplugged or the
POWER switch has been turned off for a long
time.
Wrong connection.
No video input is assigned.
Improper connection.
Improper OSD selector setting.
Improper connection.
Improper video is assigned.
The digital input selector is not set properly.
The TV (or monitor) is not set to receive the out-
put signals from the receiver.
The video cable is not connected securely.
Only S-Video connection is made.
Playback source is not Dolby Digital encoded.
Playback source is not Dolby Digital , DTS,
MPEG encoded.
The listening mode is set to “Stereo,” “5ch ste-
reo” or “Direct.”
Parameter may not be set depending on the lis-
tening mode.
No batteries in remote controller.
Batteries have worn out.
The remote controller is not pointed at the re-
mote sensor of the receiver.
The remote controller is too far from the
reciever.
Remedy
Change to FM indoor antenna.
Use antenna which has better directivity and select a
point where the distortion is least.
Install an outdoor FM antenna.
Change the position or direction of the outdoor an-
tenna.
The memory contents are lost. Store all stations again.
Check the connection again. Insert the plugs and con-
nectors completely.
Assign a proper video input.
Check connections.
Set the OSD selector properly.
Check connections.
Check Video Assign setting.
Check Digital Input setting.
Set the TV (or monitor) to the receiver input.
Check connections.
Make also video connection.
Check that the DOLBY DIGITAL indicator lights up
on the display.
Check that the DOLBY DIGITAL , DTS, MPEG in-
dicator lights up on the display.
See the table on page 38.
See the table on page 38.
Insert batteries.
Replace batteries.
Point the remote controller at the remote sensor of the
reciever.
Operate the remote controller within 16 feet (5m).
See
page
15
15
15
15
25
9
33
8
8, 9
8
40
23, 29
-
8
8
38
38
38
38
5
5
5
5
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS777 in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info