553753
44
Zoom out
Zoom in
Previous page
1/64
Next page
44
3. Start recording at the recording device connected to
the TAPE OUT jacks.
You can press the REC OUT button to display which input
source is selected for recording. When Rec Sel : Off is
displayed, no signal is output for recording.
Notes:
You cannot use the REC OUT selector to record video signals.
Be aware that the ZONE 2 and REC OUT selectors use the same
circuit and therefore cannot be used at the same time.
Even if you change the input source that you are listening to, the
input source that is selected for recording will not change.
However, if you have selected FM (or AM) as the source to be
recorded and the AM (or FM) source button is pressed, the
source being recorded will be changed to the AM (or FM) input
signal.
Recording
2. Press the REC OUT button
repeatedly until Rec Sel : SOURCE
appears in the front display.
The signal from the currently selected source is also output to the
TAPE OUT jacks.
FM AM PHONO C
DTAPE
DVD
VIDEO 3 VIDEO 4VIDEO 2VIDEO 1
VCR 2VCR 1
3. Start recording at the recording device connected to
the TAPE OUT jacks.
Note:
Be aware that if you change the input source that you are watching
(or listening to), the source being recording will also change.
REC OUT
FM AM PHONO C
DTAPE
DVD
VIDEO 3 VIDEO 4VIDEO 2VIDEO 1
VCR 2VCR 1
Recording a source different from that you are listening
to:
The TX-DS696 allows you to listen to one source while recording
the signal from another source. The procedure below uses the
example of recording the audio from a CD player while watching the
input from a DVD player.
1. While playing the DVD, press the
REC OUT button.
REC OUT
Recording the same source that you are listening to:
1. Press the input source button for the source that you
want to record.
Recording the input source (REC OUT selector)
When using the TX-DS696 to record a source, you must select that
source to be output from the TAPE OUT jacks.
Caution
Surround and multichannel audio cannot be recorded.
You cannot perform digital recording with the TX-DS696. Also,
digital-to-analog signal conversion is not possible, so to record
audio signals from digital sources (e.g. CD players), their analog
connection must be made as well.
Recording both the audio and video
The TX-DS696 also allows you to record the audio and video signals
output from the VIDEO OUT 1 and 2 jacks.
1. Press the input source button for the source you
want to record.
2. Start recording at the recording device connected to
the VIDEO OUT 1 and 2 jacks.
Note:
Be aware that if you change the input source that you are watching
(or listening to), the source being recording will also change.
Hint
You can also record the video from one source and the audio from
another source together to make your own home movies and the like.
For example, if you want to record the video from a video camera
connected to VIDEO 4 and the audio from a CD player connected to
CD IN, at step 1 above, press the VIDEO 4 source button and then
the CD source button.
FM AM PHONO C
DTAPE
DVD
VIDEO 3 VIDEO 4VIDEO 2VIDEO 1
VCR 2VCR 1
2. Within 3 seconds, press the input source button of
the source that you wish to record.
In this example you would press the CD source button. The
signal from the CD player is now output to the TAPE OUT jacks.
Input source buttons
STANDBY/ON
STANDBY
OFF
ON
POWER
MASTER VOLUME
BASS
TREBLE
AV
RECEIVER
TX
-
DS696
PHONES
FM AM PHONO C
DTAPEDVD
REC OUT
ZONE
2 ZONE 2 LEVEL
CH LEVEL
VIDEO 3 VIDEO 4VIDEO 2VIDEO 1
VCR 2VCR 1
AUDIO
SELECTOR
TUNING PRESET
SMART
SCAN
NAVIGATOR
PRESET MEMORY
FM
MODEDISPLAY DIMMER
PUSH TO ENTER
DSP
/
MODE ADJ
SETUP
RETURN
REC OUT
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info