553752
20
Zoom out
Zoom in
Previous page
1/52
Next page
20
Speaker setup
4. Press either the jog dial or the
cursor button on the remote controller
again.
The test sound will now be heard from a
different speaker.
5. Turn the jog dial or press the or
cursor buttons on the remote
controller to adjust the volume of the
test sound from this speaker to the
same level that you heard from the
previous speaker.
You can adjust the level in the range between -12 dB and +12 dB.
6. Repeat the procedure in step 4 and 5 until the volume of
the test sound from all speakers is the same level.
Each time you press the jog dial or the
button on the remote
controller, the test sound will be heard from a different speaker. The
speaker order for calibration is LEFT (front left) CENTER
(center) RIGHT (front right) SURR RIGHT (surround right)
SURR LEFT (surround left) SUBWOOFER (subwoofer).
7. Press the RETURN button.
You return to the LEVEL CAL? display.
Notes
:
If you press the RETURN button again, you go back up one more
level.
To exit the setup mode immediately, press the SETUP button.
You can also press the TEST button on the remote controller to perform
the Level Calibration setting. For more details, see page 9.
3. Press the jog dial or ENTER button on
the remote controller.
A test sound (pink noise) will be heard from the
left front speaker. At this point, it is not
necessary to adjust the volume of the test
sound.
2. Press the jog dial or the ENTER button
on the remote controller.
FEET: Select if you will enter the distances in feet.
METERS: Select if you will enter the distances in meters.
4. Press the jog dial or the cursor
button on the remote controller.
3. Press the jog dial or the ENTER button
on the remote controller.
2. Press the jog dial or the ENTER button
on the remote controller.
f
t
dB
SETUP
PUSH TO ENTER
DSP
/
MODE ADJ
Speaker Distance
These settings tell the TX-DS595 how far away your speakers are
located from the listening position so that it can provide the optimum
sound space. If you are continuing from setting the speaker
configuration and are still in the setup mode, skip directly to step 2.
1. Press the SETUP button.
If anything other than 1. SPEAKER SETUP
appears, turn the jog dial or press the
and
cursor buttons on the remote controller until 1.
SPEAKER SETUP appears.
Level Calibration
These settings allow you to set the volume levels of each speaker
individually so that they all sound at the same level when heard from
the listening position. If you are continuing from setting the speaker
distances and are still in the setup mode, skip directly to step 2.
1. Press the SETUP button.
If anything other than 1. SPEAKER SETUP
appears, turn the jog dial or press the
and
cursor buttons on the remote controller until 1.
SPEAKER SETUP appears.
RETURN
SETUP
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
Then turn the jog dial or press the and
cursor buttons on the remote controller to set
the distance from the front speakers to the
listening position.
Then turn the jog dial or press the
cursor
button on the remote controller to display
SPEAKER DISTANCE.
Then turn the jog dial or press the
and
cursor buttons on the remote controller to
select the unit of measurement.
You can set the distance in the range of 1 feet (0.3 m) - 30 feet (9 m)
in 1 feet (0.3 m) steps.
5. Repeat the procedure in step 4 to set the distance from
the center speaker (CENTER) and the surround speakers
(SURR L/R) to the listening position.
6. Press the RETURN button.
You return to the SP DISTANCE? display.
Notes:
If you press the RETURN button again, you go back up one more
level.
To exit the setup mode immediately, press the SETUP button.
Then turn the jog dial or press the
cursor
button on the remote controller to display the
LEVEL CAL.
RETURN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS595 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS595 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS595

Onkyo TX-DS595 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info