553751
20
Zoom out
Zoom in
Previous page
1/36
Next page
20
Connecting the power
Turning this unit ON from an z-connected
component
When the DVD player, CD player or MD recorder connected with
the TX-DS494 through z cables is turned on, the TX-DS494
automatically turns on and selects the source that was turned on.
Turning the TX-DS494 off sets the z-connected DVD player,
CD player or MD recorder to standby mode.
When the TX-DS494 is already on, pressing the play button on the
DVD player, CD player, cassette deck or MD recorder merely
selects the input source that was played.
Notes:
The function of turning on the TX-DS494 is not available if its
POWER switch is set to the off position (OFF) or the source
components is not connected properly. When controlling the
TX-DS494 from an z-connected component, make sure that
the POWER switch of this unit is set to the on position (_ ON)
and that the component is connected properly.
When a cassette tape deck or MD recorder is connected with
the z connector of this unit, it can be controlled from the
source component selected with the TAPE button.
Certain component models may not be able to control the
TX-DS494.
Connecting the power
The TX-DS494 is shipped with the main power (POWER)
switch in the on position (
_ ON
). When the power cord is
plugged in for the first time, the TX-DS494 will automatically
enter the standby state and the STANDBY indicator will light
(same condition after step 2 below).
Before you plug in the TX-DS494, confirm that all
connections have been made properly.
Turning on the power may cause a momentary power surge,
which might interfere with other electrical equipment on the
same circuit, such as computers. If this happens, use a wall
outlet on a different circuit.
1. Plug the power cord into an AC wall outlet.
2. Press the POWER switch to set the TX-DS494 to
standby state.
The STANDBY indicator lights up.
3. Press the STANDBY/ON button to turn on the
TX-DS494.
The display lights up and the STANDBY indicator turns off.
If you press the STANDBY/ON button again, the receiver
returns to standby mode.
Turning the power on from the remote
controller
Before you can use the remote controller, you must perform steps
1 and 2 above and place the TX-DS494 in the standby state.
Press the STANDBY/ON button on the remote
controller to turn on the TX-DS494 (take it out of
the standby state).
To return the TX-DS494 to the standby state, press the
STANDBY/ON button on the remote controller.
Memory preservation
This unit does not require memory preservation batteries. A
built-in memory power backup system preserves the contents
of the memory during power failures and even when the
POWER switch is set to off. The POWER switch must be set
to on in order to charge the backup system.
The memory preservation period after the unit has been
turned off varies depending on climate and placement of the
unit. On the average, memory contents are protected over a
period of a few weeks after the last time the unit has been
turned off. This period is shorter when the unit is exposed to a
highly humid climate.
STANDBY indicator
STANDBY/ON
OFF
ON
POWER
PHONES
MASTER VOLUME
BASS
TREBLE
AV
RECEIVER
TX
-
DS
494
FM
AM
PHONO
C
D
TAPE
VIDEO
1
DVD
ABSPEAKERS
DIMMER
SURROUND
DTS/
VIDEO
2
VCR
AUDIO
SELECTOR
LISTENING MODE
DSP
STEREO
DISPLAY
STANDBY
SP SEL TUNING PRESET
MEMORY
SW
MODE
DIGITAL
INPUT
FM
MODE
CLEAR
R
C
-
4
4
3
S
R
E
M
O
T
E
C
O
N
T
R
O
L
L
E
R
INPUT SELECTOR
MODE
SLEEP DIMMER DISPLAY
CD TAPE PHONO TUNER
D V D VIDEO 1 VIDEO 2
SUR MODE
SW MODE AUDIO SEL
TUNER
PRESET
STANDBY/ ON
STANDBY/ ON
DISC
MUTING
DVD CD TAPE
VOLUME
TOP MENU
MENU
CH SEL
RETURN
SETUP
TEST TONE
LEVEL
ENTER
POWER
STANDBY/ON
STANDBY/ON
To wall outlet
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS494 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS494 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS494

Onkyo TX-DS494 User Manual - German - 34 pages

Onkyo TX-DS494 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info