553751
11
Zoom out
Zoom in
Previous page
1/36
Next page
11
Rear panel facilities
p z (REMOTE CONTROL)
Connect the Onkyo components that have z connectors such as a
CD player, and cassette tape deck using the z cables provided
with them. When these components are interconnected, they can be
controlled from the remote controller provided with the TX-DS494.
After connecting the z connectors, check the operation of the
remote controller buttons for use in controlling other components
(refer to page 30).
For remote control operation, the audio connection cables
must also be connected.
The RC-443S or RC-444M remote controller does not support
turntables.
If the connected component has two z connectors, you can
use either one to connect to the TX-DS494. The other one can
be used to daisy chain with another component.
q AC OUTLETS
The TX-DS494 is supplied with AC mains outlets for connecting
the power cords from other devices so that their power is supplied
through the TX-DS494. By doing this, you can use the
STANDBY/ON button on the TX-DS494 to turn on and off the
connected devices as well.
The shape, number, and total capacity of the AC outlets may differ
depending on the area of purchase.
Caution:
Make sure that the total capacity of the other components
connected to this unit does not exceed the capacity that is printed
on the rear panel (e.g., 120 watts).
7 AUDIO IN/OUT
These are the analog audio inputs and outputs. There are 6 audio
inputs (3 of which are linked to video inputs) and 2 audio outputs
(1 of which are linked to a video output). The audio jacks are
nominally labeled for turntables, compact disc players, cassette
tape decks, and DVD players. To the audio jacks for VIDEO 1 and
2 connect the audio output from LD players, VCRs or other video
components. The audio inputs and outputs require RCA type
connectors.
When connecting a VCR or other video component, make sure
you connect the audio and video leads together (i.e., both to
VIDEO 1).
The PHONO jacks are designed for use with turntables that
use moving magnet cartridges.
8 DIGITAL INPUT (OPTICAL/COAXIAL)
These are the digital audio inputs. There are 2 digital inputs with
coaxial jacks and 1 with optical jacks. The inputs accept digital
audio signals from a compact disc, LD, DVD, or other digital
source component.
When using the optical input jack, remove the protective cap
and keep it safely. When the jack is not used, replace the
protective cap.
When using an optical input jack, always use an optical fiber
cable.
When using the digital inputs, make sure to also connect the
analog connections whenever possible.
9 MULTI CHANNEL INPUT
By connecting a DVD player, MPEG decoder, or other component
that has a multi channel port, you can playback the audio with 5.1
channel output. So, be sure to prepare a cable that can properly
connect the TX-DS494 to the peripheral device.
Connect the video output to one of VIDEO IN connectors
(DVD, VIDEO 1 and VIDEO 2).
Optical fiber cable
Coaxial cable (RCA type)
RCA type
AC 230-240V 50Hz
SWITCHED
TOTAL 100W MAX.
AC OUTLETS
AC OUTLETS
AC 120V 60Hz
SWITCHED
TOTAL 120W 1A MAX.
REMOTE
CONTROL
Ex: Onkyo CD player
Ex: Onkyo cassette
tape deck
TX-DS494
z connector
z connector
L
L
R
R
FRONT
CENTER
SURR
SUB
WOOFER
RL
1
2
COAXIAL
A
B
FRONT
SPEAKERS
IN
OUT
VIDEO
IN
IN
MULTI
CHANNEL INPUT
1
2
3
7
4
5
6
DVD player/MPEG decoder
Ex: Onkyo DVD Player
1. Front right
2. Surround right
3. Center
4. Front left
5. Surround left
6. Subwoofer
7. Video
Other components
COAXIAL
OPTICAL
or
etc.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS494 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS494 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS494

Onkyo TX-DS494 User Manual - German - 34 pages

Onkyo TX-DS494 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info