Manual Onkyo TX-8270 (page 10 of 453) (English, German, Dutch, French, Swedish, Spanish)

699946

Zoom out

Zoom in

1/453

Step2: Connect the Speakers

Up to two powered subwoofers can be connected. The

same signal is output from each of the SUBWOOFER PRE

OUT jacks. When connecting another set of front speakers

to use as the Speakers B System, connect them to the

SPEAKERS B terminals. Connect using the same method

described for SPEAKERS A. Note that when connecting to

both SPEAKERS A and B terminals, connect speakers with

8 ≠ to 16 ≠ impedance to both A and B.

Connect the speaker cable so the wires do not protrude from the

speaker jacks. If the exposed wires of the speakers touch the

rear panel or the + and - wires touch each other, the protection

circuit will be activated.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

Speaker B

1/2˝

(12 mm)

a Speaker cable, b Subwoofer cable

Setup

0 If a powered subwoofer is not connected, then

after Initial Setup is complete, settings are

required in the Setup menu. Press SETUP on the

remote controller, select "2. Speaker" -

"Configuration" and set "Subwoofer" to "No".

If any of the connected speakers have an

impedance of 4

≠

or more to less than 6

≠

, or when

a Speaker B system is to be used, after completing

Initial Setup, you need to make some settings in the

Setup menu. Press SETUP on the remote

controller, select "2. Speaker" - "Configuration" and

set "Speaker Impedance" to "4ohms".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-8270 in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 16,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-8270 Manual

Product: