601917
27
Zoom out
Zoom in
Previous page
1/44
Next page
Listening to AM/FM radio
27
It
De
“Preset Written” appears on the display, and the radio
station being received is registered. If there is already
a radio station registered, it is replaced.
2. Press one of the BGM buttons 1 to 4 to listen to the
stations you have preset. If you press these buttons
when the unit is in standby mode, it comes on and
starts receiving the station.
Presetting a radio station
It allows you to register up to 40 of your favorite radio
stations. Registering radio stations in advance allows you
to tune into your radio station of choice directly.
Registering radio stations
1. Tune into the AM/FM radio station you want to register.
2. Press the MEMORY button on the unit.
3. Press the
2
PRESET
1
buttons several times to select
a number between 1 and 40 while the preset number
is flashing (about 8 seconds).
4. Press the MEMORY button again to register the
station.
The preset number stops flashing and lights to indicate
that the station is registered.
Selecting preset stations
1. Press the TUNER button of the remote control
repeatedly to select either “AM” or “FM” on the display.
2. Press CH (
i
/
j
) buttons to select a preset number.
0
You can also select by directly entering the preset
number with the number buttons. Alternatively you
can press the
2
PRESET
1
buttons on the unit.
Naming a preset radio station:
1. Press the SETUP button of the remote control while
a preset number is displayed, use the direction ( /
) buttons to select “4. Source”, and press the
ENTER button.
2. Use the direction ( / ) buttons to select “Name
Edit” and press the ENTER button.
3. Enter a name up to 10 characters long.
0
For information on how to input characters, see
“Inputting characters” (
>
30) under “Various
settings”.
Erasing a preset radio station:
1. Press and hold the MEMORY button on the main
unit and press the TUNING MODE button to delete
the preset number.
The preset number is deleted, and the number on
the display goes off.
Receiving RDS
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals.
0
RDS works only in areas where RDS broadcasts are
available.
0
In some cases, the text information appeared on the
display is not identical to the content transmitted by the
RDS station. Furthermore, unexpected characters may
be displayed when the unit receives unsupported
characters. However, this is not a malfunction.
0
If the signal from an RDS station is weak, the RDS
data may be displayed continuously or not at all.
PS (Program Service):
Tuning into a radio station
distributing Program Service information displays the
radio station name. Pressing the DISPLAY button
displays the frequency for 3 seconds.
RT (Radio Text):
Tuning into a radio station transmitting
Radio Text information displays text on the display of the
unit.
MEMORY TUNING MODE
CH (
/
)
SETUP
TUNER
ENTER
,
PRESET
Number
buttons
RT/PTY/TP ENTER
PRESET
DISPLAY
TX-8130_mst.book 27 ページ 2015年6月9日 火曜日 午後5時20分
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-8130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-8130 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-8130

Onkyo TX-8130 User Manual - German - 80 pages

Onkyo TX-8130 User Manual - Dutch - 80 pages

Onkyo TX-8130 User Manual - French - 80 pages

Onkyo TX-8130 User Manual - Italian - 80 pages

Onkyo TX-8130 User Manual - Swedish - 80 pages

Onkyo TX-8130 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info