608265
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
System connections
Do not plug in the AC power cord until all other connections have been made.
On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the
left channel. Refer to the amplifier’s instruction manual for further information on connections.
Power connections
LRLR
(REC)(PLAY)
IN
(REC) (PLAY)
OUT
L L
R R
REMOTE
CONTROL
Connecting to an amplifier
Connect the tape deck LINE IN
jacks to the TAPE REC jacks on the
rear panel of the amplifier and the
tape deck LINE OUT jacks to the
amplifier TAPE PLAY jacks.
Refer to the amplifier’s instruction
manual for further information on
connections.
Amplifier
See “Connecting Onkyo components for z
operation” on page 12.
To AC outlet
Plug the AC
power cord
into a wall
outlet.
1
2
3
STANDBY/ON
MAIN POWER
ON
OFF
STANDBY
STANDBY/ON
MAIN POWER
ON
OFF
STANDBY
STANDBY
STANDBY/ON
For North American model:
1. Plug the AC power cord into a wall
outlet.
The STANDBY indicator will light.
2. Press the STANDBY/ON button.
The STANDBY indicator will go out
and the display will light.
For non-North American model:
1. Plug the AC power cord into a wall
outlet.
2. Press the MAIN POWER switch.
The STANDBY indicator will light.
3. Press the STANDBY/ON button.
The STANDBY indicator will go out
and the display will light.
Pressing the a or s button of either
Deck A or Deck B when the unit is in
standby status will also cause the dis-
play to light and playback will start.
If the tape deck is plugged into the
amplifier’s AC outlet, the amplifier’s
AC power cord must be plugged into a
wall outlet and its power switched on
before the tape deck can operate.
Switching power on
non-North American modelsNorth American models
non-North American models
TA-RW255_En.book Page 5 Tuesday, April 19, 2005 4:36 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TA-RW255 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TA-RW255 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info