462083
89
Zoom out
Zoom in
Previous page
1/108
Next page
89
En
Can’t learn commands from another remote
controller
There’s no sound
There’s no video
The AV controller’s remote controller doesn’t
control my iPod/iPhone
The AV controller unexpectedly selects your
iPod/iPhone as the input source
iPod/iPhone doesn’t work properly
Can’t record
There’s no sound
Can’t access the server or Internet radio
Make sure you’ve selected the correct remote
controller mode.
11, 82
For a proper operation of the remote controller as a
cassette tape deck is connected to the TV/CD IN
jack, or as an RI Dock is connected to the TV/CD
IN, VCR/DVR IN or GAME IN jacks, you must set
the input display accordingly.
45
If you cannot operate it, you will need to enter the
appropriate remote control code.
80
To control another manufacturer’s component, point
the remote controller at that component.
81
If none of the codes work, use the Learning function
to learn the commands of the other component’s
remote controller.
84
To control an Onkyo component that’s connected
via u, point the remote controller at the AV
controller. Be sure to enter the appropriate remote
control code first.
81
To control an Onkyo component that’s not
connected via u, point the remote controller at the
component. Be sure to enter the appropriate remote
control code first.
82
The entered remote control code may not be correct.
If more than one code is listed, try each one.
When learning commands, make sure that the
transmitting ends of both remote controllers are
pointing at each other.
84
Are you trying to learn from a remote controller that
cannot be used for learning? Some commands
cannot be learned, especially those that contain
several instructions.
UP-A1 Dock for iPod/iPhone
Make sure your iPod/iPhone is actually playing.
Make sure your iPod/iPhone is properly inserted in
the Dock.
Make sure the UP-A1 Dock is connected to the
UNIVERSAL PORT jack on the AV controller.
Make sure the AV controller is turned on, the correct
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod/iPhone.
Make sure that your iPod/iPhone model’s TV OUT
setting is set to On.
Make sure the correct input is selected on your TV
or the AV controller.
Some versions of the iPod/iPhone do not output
video.
Make sure your iPod/iPhone is properly inserted in
the Dock. If your iPod/iPhone is in a case, it may not
connect properly to the Dock. Always remove your
iPod/iPhone from the case before inserting it into the
Dock.
The iPod/iPhone cannot be operated while it’s
displaying the Apple logo.
Make sure you’ve selected the right remote mode. 26
When you use the AV controller’s remote controller,
point it toward your AV controller.
When connecting the UP-A1 Dock to the radio tuner
UP-HT1 (North American models)/UP-DT1
(European and Asian models) with AUTO selected
with the tuner’s Mode Selector switch, you can
switch the input source between the UP-A1 Dock
and the tuner, by pressing PORT repeatedly on the
front panel.
If you still can’t control your iPod/iPhone, start
playback by pressing your iPod/iPhone model’s Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.
Depending on your iPod/iPhone, some buttons may
not work as expected.
Always pause iPod/iPhone playback before selecting
a different input source. If playback is not paused,
the Direct Change function may select your
iPod/iPhone as the input source by mistake during
the transition between tracks.
Try reconnecting your iPod/iPhone.
Recording
On your recorder, make sure the correct input is
selected.
To prevent signal loops and damage to the AV
controller, input signals are not fed through to
outputs with the same name (VCR/DVR IN to
VCR/DVR OUT).
When the Pure Audio listening mode is selected,
recording is not possible because no video signals
are output. Select another listening mode.
Zone 2/3
Only components connected to analog inputs can be
played in Zone 2/3.
Music Server and Internet Radio
Check the network connection between the AV
controller and your router or switch.
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
Make sure the server is up and running and
compatible with the AV controller.
101,
103
Check the “Network” settings. 68
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PR-SC5509 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PR-SC5509 in the language / languages: English as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PR-SC5509

Onkyo PR-SC5509 User Manual - German - 212 pages

Onkyo PR-SC5509 User Manual - Dutch - 212 pages

Onkyo PR-SC5509 User Manual - Italian - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info