452195

Onkyo PR-SC5508 Manual

93
Zoom out
Zoom in
Previous page
1/108
Next page
93
En
Note
• The remote controller can learn approximately 70 to 90 com-
mands, although this will be less if commands that use a lot of
memory are learned.
• Remote controller buttons such as Play, Stop, Pause, and so on
are preprogrammed with commands for controlling Onkyo CD
players, cassette decks, and DVD players. However, they can
learn new commands, and you can restore the preprogrammed
commands at any time by resetting the remote controller (➔ 89).
• To overwrite a previously learned command, repeat this proce-
dure.
• Depending on the remote controller that you are using, there may
be some buttons that won’t work as expected, or even some
remotes that cannot be learned at all.
• Only commands from infrared remote controllers can be learned.
• When the remote controller’s batteries expire, all learned com-
mands will be lost and will have to be learned all over again, so
don’t discard your other remote controllers.
■ Deleting Learning Commands
1. While holding down REMOTE MODE for the mode
in which you want to delete the command, press and
hold down TV 9 until REMOTE MODE button
lights (about 3 seconds).
2. Press REMOTE MODE or the button from which you
want to delete the commands.
REMOTE MODE button flashes twice.
When you press REMOTE MODE, all commands
learned in that remote mode will be deleted.
You can program the remote controller’s ACTIVITIES to
perform a sequence of remote control actions.
Example:
To play a CD you typically need to perform the following
actions:
1. Press RECEIVER to select the Receiver remote con-
troller mode.
2. Press ON to turn on the AV controller.
3. Press TV/CD to select the TV/CD input source.
4. Press 1 to start playback on the CD player.
You can program ACTIVITIES so that all four actions are
performed with just one button press.
Making Macros
Each ACTIVITIES can store one macro, and each macro
can contain up to 32 commands.
Running Macros
Deleting Macros
Using Normal Macros
RECEIVER
MY MOVIE,
MY TV,
MY MUSIC
ALL OFF
1
While holding down RECEIVER, press and hold
down MY MOVIE, MY TV, or MY MUSIC until
MY MOVIE, MY TV, or MY MUSIC lights (about
3 seconds).
2
Press the buttons whose actions you want to pro-
gram into the macro in the order you want them
performed.
For the CD example above, you’d press the following
buttons: ON, TV/CD, 1.
Note
• MODE is invalid at macro making operation.
3
When you’ve finished, press ACTIVITIES again.
ACTIVITIES button flashes twice.
If you enter 32 commands, the process will finish
automatically.
Note
• Once you have taught a new macro commands, the origi-
nal macro will no longer work. If you retrieve it, you will
have to taught again.
Press MY MOVIE, MY TV, or MY MUSIC.
The commands in the macro are transmitted in the
order in which they were programmed. Keep the
remote controller pointed at the AV controller until
all of the commands have been transmitted.
Macros can be run at any time, regardless of the cur-
rent remote controller mode.
1
While holding down HOME, press and hold down
ALL OFF until ALL OFF lights (about 3 seconds).
2
Press ALL OFF again.
ALL OFF flashes twice.
Note
• You can use Easy macro when the macro is deleted
(➔ 28).
• When you use Normal macro, you cannot use the easy
macro command including the change of the source com-
ponent.
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PR-SC5508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PR-SC5508 in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PR-SC5508

Onkyo PR-SC5508 User Manual - German, French - 216 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info