601414
151
Zoom out
Zoom in
Previous page
1/156
Next page
151
Troubleshooting—Continued
Make sure you’ve selected the correct remote control-
ler mode (pages 15 and 137 to 143).
When using the remote controller to control other
manufacturers’ AV components, some buttons may
not work as expected.
Make sure you’ve entered the correct remote control
code (page 135).
Make sure to set the same ID on both the AV controller
and remote controller (page 107).
Can’t control other components
If it’s an Onkyo component, make sure that the
cable and analog audio cable are connected properly.
Connecting only an cable won’t work (page 42).
Make sure you’ve selected the correct remote control-
ler mode (pages 15 and 137 to 143).
If you’ve connected an -capable Onkyo MD
recorder, CD recorder, RI Dock to the TV/TAPE IN/
OUT jacks, or an RI Dock to the GAME IN or VCR/
DVR IN jacks, for the remote controller to work prop-
erly, you must set the display to MD, CDR, or DOCK
(page 55).
If you cannot operate it, you will need to enter the
appropriate remote control code (page 135).
To control another manufacturer’s component, point
the remote controller at that component.
If none of the codes work, use the Learning function
to learn the commands of the other component’s
remote controller (page 146).
With some AV components, certain buttons may not
work as expected, and some may not work at all.
To control an Onkyo component that’s connected via
, point the remote controller at the AV controller.
Be sure to enter the appropriate remote control code
first (page 136).
To control an Onkyo component that’s not connected
via , or another manufacturer’s component, point
the remote controller at the component. Be sure to
enter the appropriate remote control code first
(page 135).
The entered remote control code may not be correct. If
more than one code is listed, try each one.
Can’t learn commands from another remote
controller
When learning commands, make sure that the trans-
mitting ends of both remote controllers are pointing at
each other.
Are you trying to learn from a remote controller that
cannot be used for learning? Some commands cannot
be learned, especially those that contain several
instructions.
There’s no sound
Make sure your iPod is actually playing.
Make sure your iPod is inserted properly in the Dock.
Make sure the UP-A1 Dock is connected to the UNI-
VERSAL PORT jack on the AV controller.
Make sure the AV controller is turned on, the correct
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod.
There’s no video
Make sure that your iPod’s TV OUT setting is set to
On.
Make sure the correct input is selected on your TV or
the AV controller.
Some versions of the iPod do not output video.
The AV controller’s remote controller doesn’t
control your iPod
Make sure your iPod is properly inserted in the Dock.
If your iPod is in a case, it may not connect properly
to the Dock. Always remove your iPod from the case
before inserting it into the Dock.
The iPod cannot be operated while it’s displaying the
Apple logo.
Make sure you’ve selected the right remote mode.
When you use the AV controller’s remote controller,
point it toward your amp.
If you still can’t control your iPod, start playback by
pressing your iPod’s Play button. Remote operation
should then be possible.
Try resetting your iPod.
Depending on your iPod, some buttons may not work
as expected.
You can’t control your iPod if the battery is extremely
low. Use the iPod after recharging for a while.
The AV controller unexpectedly selects your
iPod as the input source
Always pause iPod playback before selecting a differ-
ent input source. If playback is not paused, the Direct
Change function may select your iPod as the input
source by mistake during the transition between
tracks.
Can’t record
On your recorder, make sure the correct input is
selected.
To prevent signal loops and damage to the AV control-
ler, input signals are not fed through to outputs with
the same name (e.g., TAPE IN to TAPE OUT or VCR/
DVR IN to VCR/DVR OUT).
When the Pure Audio listening mode is selected,
recording is not possible because no video signals are
output. Select another listening mode.
Dock for iPod
Recording
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PR-SC5507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PR-SC5507 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PR-SC5507

Onkyo PR-SC5507 User Manual - German, French - 312 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info