601414
128
Zoom out
Zoom in
Previous page
1/156
Next page
128
Multi Zone—Continued
Note:
This procedure can also be performed on the AV control-
ler by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Zone2/3 Out
If you’ve connected your Zone 2/3 speakers to an amp
with no volume control, set the “Zone2 Out” and “Zone3
Out” setting, respectively, to “Variable” so that you can
set the volume, balance, and tone of zone 2/3 on the AV
controller.
Zone2/3 Maximum Volume
With this setting, you can limit the maximum volume for
Zone 2/3. When the “Volume Display” setting is set to
“Absolute”, the “Maximum Volume” range is 50 to 99.
When it’s set to “Relative”, the range is –32 dB to
+17 dB. To disable this setting, select “Off”.
Zone2/3 Power On Volume
This setting determines what the volume will be for
Zone 2/3 each time the AV controller is turned on.
When the “Volume Display” preference is set to “Abso-
lute”, the range is “Last”, “Min”, 1 to 99, or “Max”.
When it’s set to “Relative”, the range is “Last”, – dB,
–81 dB to +18 dB.
To use the same volume level as when the AV controller
was last turned off, select “Last”.
The “Zone2/3 Power On Volume” cannot be set higher
than the “Zone2/3 Maximum Volume” setting.
Zone2 Component Out
If you’ve connected the COMPONENT VIDEO ZONE
2 OUT to a TV in Zone 2, this setting is set to “Use”.
Note:
If the “Zone2 Component Out” setting is set to “Not
Use”, the same video signal as COMPONENT VIDEO
MONITOR OUT is output from ZONE2 OUT (compo-
nent).
Setting the Multi Zone
1
Press the [RECEIVER] button
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ]
buttons to select “7. Hardware
Setup”, and then press [ENTER].
The “Hardware Setup” menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select “2. Multi Zone”,
and then press [ENTER].
The “Multi Zone” menu appears.
4
Use the Up and Down [ ]/[ ]
buttons to select an item, and
use the Left and Right [ ]/[ ]
buttons to change it.
The items are explained below.
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Network
6. Firmware Update
Zone2 Out
Zone2 Maximum Volume
Zone2 Power On Volume
Zone2 Component Out
Zone3 Out
Zone3 Maximum Volume
Zone3 Power On Volume
Fixed
Off
Last
Use
Fixed
Off
Last
7–2. Multi Zone
5
When you’ve finished, press the
[SETUP] button.
The setup menu closes.
Fixed: The Zone 2/3 volume must be set on the
amp in that zone (default).
Var iab le: The Zone 2/3 volume can be set on the AV
controller.
Use: Select if a TV in Zone 2 is connected the
COMPONENT VIDEO ZONE 2 OUT.
Not Use: Select if no TV in Zone 2 is connected the
COMPONENT VIDEO ZONE 2 OUT.
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PR-SC5507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PR-SC5507 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PR-SC5507

Onkyo PR-SC5507 User Manual - German, French - 312 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info