686250
104
Zoom out
Zoom in
Previous page
1/110
Next page
68
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Audio
Make sure that the speaker setup microphone is not still
connected.
Confirm that the connection between the output jack on
the device and the input jack on this unit is correct.
Make sure that none of the connecting cables are bent,
twisted, or damaged.
If the MUTE indicator on the display flashes, press
on the remote controller to cancel muting.
While headphones are connected to the PHONES jack,
no sound is output from the speakers.
When "Source" - "Audio Select" - "PCM Fixed Mode" in
the Setup menu is set to "On", no sound is played when
signals other than PCM are input. Change the setting to
Off.
Check the following if the above does not fix the problem:
There is no sound from the TV
Change the input selector on this unit to the position of
the terminal to which the TV is connected.
If the TV doesn't support the ARC function, along with
connection by HDMI, connect the TV and this unit using
a digital optical cable, digital coaxial cable, or analog
audio cable.
No sound from a connected player
Change the input selector on this unit to the position of
the terminal to which the player is connected.
Check the digital audio output setting on the connected
component. On some game consoles, such as those
that support DVD, the default setting is off.
With some DVD-Video discs, you need to select an
audio output format from a menu.
A speaker produces no sound
Make sure that the polarity of the speaker cables (/)
is correct, and that no bare wires are in contact with the
metal part of speaker terminals.
Make sure that the speaker cables are not shorting.
Check how to connect the speakers in the Basic Manual
that the speaker connections have been made correctly.
Settings for the speaker connection environment need
to be made in "AccuEQ Room Calibration" in Initial
Setup. Check in "Initial Setup" in the Basic Manual.
Depending on the source and current listening mode,
not much sound may be produced by the surround
speakers. Select another listening mode to see if sound
is output.
If you are installing surround back speakers (for
compatible models only), surround speakers are
required.
The subwoofer produces no sound
When you play source material that contains no
information in the LFE channel, the subwoofer produces
no sound.
When " Speaker" - "Crossover" - "Front" in the Setup
menu is set to "Full Band" and during 2ch input such
as from the TV or music, the low range elements will
be output from the front speakers rather than from
the subwoofer. If you would rather output from the
subwoofer, make one of the following settings.
Change "Front" setting to the crossover frequency
value other than "Full Band":
The range below the frequency you specify will
be output from the subwoofer rather than the
front speakers. We do not recommend changing
this if your front speakers have good low range
reproduction capabilities.
Change "Double Bass" setting to "On":
The low range elements will be output from both the
front speakers and the subwoofer. This may mean
that there is too much bass. We recommend that you
do not change the setting or change "Front" setting
to the crossover frequency value other than "Full
Band" if this happens.
Noise can be heard
Using cable ties to bundle audio cables with power
cords, speaker cables, etc. may degrade the audio
performance, so refrain from doing it.
An audio cable may be picking up interference. Try
repositioning your cables.
The beginning of audio received by an HDMI IN
cannot be heard
Since it takes longer to identify the format of an HDMI
signal than it does for other digital audio signals, audio
output may not start immediately.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PR-RZ5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PR-RZ5100 in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PR-RZ5100

Onkyo PR-RZ5100 User Manual - German, Dutch, Italian, Swedish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info