645350
62
Zoom out
Zoom in
Previous page
1/68
Next page
62
Troubleshooting
How to reset to factory default?
R-1045/R-1045DAB
If you have any trouble using the stereo receiver, look for a solution in this section.
C-1045
If you have any trouble using the CD Player, look for a solution in this section.
Power
Can't turn on the stereo receiver.
Make sure that the power cord is properly plugged into the wall outlet (see page 22).
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
Can’t turn on the CD Player.
Make sure that the power cord is properly plugged into the wall outlet (page 22).
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
The stereo receiver turns off unexpectedly.
If the sleep timer has been set and the TIMER indicator is shown on the display, the stereo receiver will turn off
automatically after a specified period.
When timed playback finishes, the stereo receiver automatically switches to Standby mode.
If the STANDBY LED is flashing, the built-in amplifier protection circuit has been activated. This can happen if
there’s a short between the positive and negative wires of a speaker cable.
Audio
There's no sound.
Make sure the stereo receiver’s volume control is not set to minimum (see page 25).
Make sure the correct input source is selected (see page 25).
The audio input signal selected by the input selector is output to LINE2 OUT.
However, no audio signal is output if LINE2 is selected by the input selector.
Make sure the stereo receiver is not muted (see page 26).
Make sure the speakers are connected correctly (see page 19).
Check all connections and correct as necessary (see pages 16 to 22).
While headphones are connected, the speakers output no sound (see page 26).
The speakers output no sound when it is connected with the iPod.
Make sure that there is no unsupported file formats or signals.
1 While holding down the [MODE/RETURN] button, press the [ON/STANDBY] button on the
main unit.
2 “Clear” appears for 3 seconds on the display, then the stereo receiver will automatically go
Standby.
Do not operate the stereo receiver while “Clear” is displayed.
Note that resetting the stereo receiver will delete your custom settings.
If you can’t resolve the issue yourself, try resetting the CD Player before contacting your Onkyo dealer.
To reset the CD Player to its factory defaults, turn it on and, while holding down the [ ]
button, press the [ ] button. “Clear” will appear on the display.
Note that resetting the CD Player will delete your custom settings.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PHA-1045DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PHA-1045DAB in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PHA-1045DAB

Onkyo PHA-1045DAB User Manual - German - 132 pages

Onkyo PHA-1045DAB User Manual - Dutch - 132 pages

Onkyo PHA-1045DAB User Manual - French - 132 pages

Onkyo PHA-1045DAB User Manual - Italian - 132 pages

Onkyo PHA-1045DAB User Manual - Swedish - 132 pages

Onkyo PHA-1045DAB User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info