492658
18
Zoom out
Zoom in
Previous page
1/20
Next page
18
En
Appendix
Troubleshooting
If the PA-MC5501 fails to function normally, first check
the following points before contacting your Onkyo dealer.
If the problem is not solved after going through the
following list, unplug the power cord and contact your
Onkyo dealer.
No power
Power turns on but no sound
The amplifier turns off and after restoring the
power, it turns off again
The 12V trigger of the PA-MC5501 does not
react to that of the PR-SC5509
Humming or other noise is heard
Power cord is not correctly plugged into AC outlet/Inlet.
Plug the power cord into the AC outlet/Inlet properly.
Incomplete connections.
Check speaker cable connections.
Insert all plugs firmly into jacks.
No input signal from AV controller.
Check for input signal from AV controller.
Incorrect INPUT SELECT switch setting.
Set INPUT SELECT switch to correct setting.
The protection circuit has been activated. Remove the power
cord from the wall outlet immediately. Make sure that all
speaker cables and input sources are properly connected, and
leave the amplifier with its power cord disconnected for 1
hour. After that, reconnect the power cord and turn the power
on. If the amplifier turns off again, unplug the power cord and
contact your Onkyo dealer.
WARNING
If smoke, smell or abnormal noise is produced by the
amplifier, unplug the power cord from the wall outlet
immediately and contact your Onkyo dealer.
Connection between the 12V trigger terminals is incomplete.
Connect the cables to the terminals firmly.
Input cable connection is incomplete.
Insert the input cable to pin jack or connector completely.
Noise from power cord or power transformer affects the input
cable.
Keep power cord or power transformer away from the
input cable.
Power cord or speaker cables are bundled together with pin
cords.
This may cause humming or noise. Do not bundle power
cord or speaker cables with pin cables together.
Connection to the input terminals is not complete or not
appropriate.
For each channel’s input terminals, connect cables or cords
to either balanced input terminal or audio input terminal only
and switch the INPUT SELECT switch accordingly.
Avoid connecting the cables or cords to the input terminals
that will not be used.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PA-MC5501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PA-MC5501 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PA-MC5501

Onkyo PA-MC5501 User Manual - German - 40 pages

Onkyo PA-MC5501 User Manual - Dutch - 40 pages

Onkyo PA-MC5501 User Manual - French - 40 pages

Onkyo PA-MC5501 User Manual - Italian - 40 pages

Onkyo PA-MC5501 User Manual - Swedish - 40 pages

Onkyo PA-MC5501 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info