452194
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
Quick Operation Guide
Here is a quick guide for those who want to listen to
music or view their favorite movies as soon as possible.
Connections and operations are explained briefly here
for the purpose of just getting you started.
For those of you who want to operate the PA-MC5500
(the amplifier) right away, follow the guide below. How-
ever, this instruction manual contains a great deal of
other information that you should know for the proper
operation of the amplifier and for a more pleasurable
experience with the amplifier. Be sure to read the rest of
this manual as well after reading this quick guide.
The procedures given below assume that the other sys-
tem components are already connected and configured.
(For example, that the source components are already
connected to the control amplifier.)
1. Lower the volume at the control amplifier.
Lower the volume of the control amplifier to the
minimum so that when the amplifier is turned on,
you do not hear loud unwanted sounds.
2. Connect the speakers to the amplifier.
Connect the speakers to the amplifier using the
proper speaker cables. Be sure to match the channels
and the positive (+) and negative (–) polarities
between the speakers and the amplifier. If the con-
nections are mistaken, the correct orientation will
not be obtained.
3. Select balanced input (XLR) or unbalanced input
(RCA) with the INPUT SELECT switch.
The amplifier possesses a balanced input (XLR) and
unbalanced input (RCA) for each channel and the
switch for the two is located between the two input
terminals. Select the proper input type depending on
the functionality of the connected cables and the
control amplifier.
Note:
Do not change the INPUT SELECT switch setting when
the amplifier is turned on.
4. Connect the control amplifier to the amplifier.
After selecting the correct input type in step 3 above,
connect the output from the control amplifier to the
corresponding input terminal on the amplifier.
Note:
Do not connect anything to the other input jack.
5. Connect the supplied power cord to the amplifier
and to the wall power outlet.
Be sure to properly plug the power cord all the way
in.
6. Press the POWER switch.
The STANDBY indicator lights red.
7. Press the ON/STANDBY button.
The ON indicator lights blue.
When you connect other device to the 12V TRIG-
GER IN terminal using the supplied cable, the power
on or off status of the amplifier synchronizes to the
action of turning on or off the connected device.
While the STANDBY indicator lights red, the ampli-
fier is in standby state waiting for 12V trigger signal.
8. Slowly increase the control amplifier volume.
Note:
After the amplifier is turned on, it takes approximately
10 seconds before the output sounds. During this time,
do not turn up the volume.
Now all that remains is to control the control amplifier
and the other connected system components and enjoy
your music or movies.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo PA-MC5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo PA-MC5500 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo PA-MC5500

Onkyo PA-MC5500 User Manual - German, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info