462126
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
En
Others
Troubleshooting
Make sure that the power cord is properly plugged into
the wall outlet ( 16).
Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it in again.
When the set ASb starts running, the power amplifier
will automatically go standby ( 21).
If the power amplifier cannot start with the Standby LED
blinking, then it may be problem with the power
amplifier. If speaker cables touch the chassis, this may
cause the power amplifier to short out and make sure the
plus terminals of speaker cables do not touch the chassis
or the minus terminals.
Please try the method below:
Set the POWER switch to OFF and disconnect all
speaker cables. Check that the top of the set (cooling
vent) is not blocked. When the power amplifier has
cooled down, reconnect all speaker cables and set the
POWER switch to ON. Then Press ON/STANDBY.
Make sure the speakers are connected correctly ( 15).
Check all connections and correct as necessary ( 15).
When making XLR IN input, make sure that the INPUT
SELECT switch is switched to the XLR side.
Make sure the correct input source is selected.
Make sure the analog audio cable is connected correctly.
Make sure that all audio connecting plugs are pushed in
all the way.
Make sure the speaker cables are connected with the
correct polarity ( 15).
Make sure all audio connecting plugs are pushed in all
the way ( 15).
The sound quality can be affected by strong magnetic
fields, such as that from a TV. Try moving any such
devices away from the power amplifier.
If you have any devices that emit high-intensity radio
waves near the power amplifier, such as a cellular phone
that’s being used to make a call, the power amplifier
may output noise.
When making RCA IN input, make sure that the INPUT
SELECT switch is switched to the RCA side.
Check the connection in case of bi-amping connection.
Audio performance will be at its best about 10 to 30
minutes after the power amplifier has been turned on and
had time to warm up.
Using cable ties to bundle audio cables with speaker or
power cables may degrade the sound quality. So don’t
do it.
Make sure the cables are connected to the jacks firmly.
Power
Can’t turn on the Power Amplifier.
The Power Amplifier turns off
unexpectedly.
Audio
There’s no sound.
The sound quality is not good.
Audio performance
External Components
The 12V trigger does not work.
The power amplifier contains a microcomputer for
signal processing and control functions. In very rare
situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In
the unlikely event that this should happen, unplug the
power cord, wait at least 5 seconds, and then plug it
again.
Before disconnecting the power cord from the wall
outlet, set the main power switch to OFF.
If during idling the cover is too hot to touch, then
ventilation needs to be improved.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo M-5000R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo M-5000R in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo M-5000R

Onkyo M-5000R User Manual - German - 48 pages

Onkyo M-5000R User Manual - Dutch - 48 pages

Onkyo M-5000R User Manual - French - 48 pages

Onkyo M-5000R User Manual - Italian - 48 pages

Onkyo M-5000R User Manual - Swedish - 48 pages

Onkyo M-5000R User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info