645301
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
Before Using
Connections
Other Information
Operation
Troubleshooting
(Continued on the next page)
If you have any problems with the unit, please check the troubleshooting table below first.
For any problems not covered in the table, please consult your nearest ONKYO authorized service
center.
Symptom
The unit doesnt turn on.
No sound is heard even
when playback starts.
Tape transport doesnt
operate.
The REC button doesnt
operate.
Sound is hoarse, or the left
and right sounds are
unbalanced.
Excessive tape hiss or noise
is heard.
Sound is distorted.
Recorded sounds are
distorted.
The tape squeals or skips
the sound.
Excessive hum is heard
while playing a tape.
Cause
The AC power cord is not
inserted in the wall outlet
securely.
The R-805TX ENERGY SAVE
function is activated. (If
connected to the R-805TX)
Hookups are incorrect.
The stereo amplifiers input
selector is set to the wrong
position.
A slack tape is wound around the
pinch roller.
No cassette is inserted in the unit.
One or both of the erasure
prevention tabs have been
removed.
The playback head is dirty.
The tape is stretched.
The playback head is magnetized.
The tape is worn out or recorded
with high noise level.
The tape is worn out, or distorted
sound is recorded.
The tape was recorded with too
high a recording level.
The heads, pinch rollers, or
capstan shafts are dirty.
The cassette shell is binding the
tape or the tape is stretched.
The audio cables are not inserted
firmly.
External flux leakage from an
amplifier or TV set is affecting to
the sound.
Remedy
Insert the AC power cord (mains
lead) plug into the wall outlet (the
mains) securely.
Please push the R-805TX
STANDBY/ON button. The power
in the main unit will be turned on.
Check the hookup and connect
the unit correctly (see page 7).
Set the amplifiers input selector
to the position the unit is
connected to.
Tighten the tape with a pencil (see
previous page).
Insert a cassette (see page 9).
Use a new cassette or cover the
erasure prevention tabs with
adhesive tape (see page 15).
Clean the tape head (see previous
page).
Use a new cassette.
Demagnetize the head (see
previous page).
Use a new cassette.
Use a new tape. (Play another tape
to make sure the cause is not
malfunction of the unit.)
Adjust the recording level (see page
13) before you start recording.
Clean the tape head (see previous
page).
Try to release the bound tape by
fast-forwarding and rewinding. If
the tape is damaged, use a new
cassette.
Insert the cable plugs firmly.
Put more distance between the
unit and appliance affecting to
the unit.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo K-505TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo K-505TX in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info