492671
47
Zoom out
Zoom in
Previous page
1/56
Next page
47
Troubleshooting—Continued
The subwoofer produces no sound
If the source material contains no audio in the
LFE channel, the subwoofer produces no
sound.
Check the Speaker Configuration (page 39).
There’s no sound with a certain signal for-
mat
Check the digital audio output setting on the
source component. On some game consoles,
such as those that can play DVDs, the default
setting is off.
With some DVD-Video discs, you need to
select an audio format from a menu or with the
AUDIO button on your Blu-ray/DVD
player/recorder’s remote controller.
The volume cannot be set to 79
Check to see if a maximum volume has been
set (page 43).
When the levels of each speaker have been
adjusted (page 40), the maximum possible
volume may be reduced.
Noise can be heard
Using cable ties to bundle audio cables with
power cords, speaker cables, and so on can
degrade audio performance, so don’t use
them.
An audio cable may be picking up interfer-
ence. Try repositioning your cables.
The Late Night function doesn’t work
Make sure that the source is Dolby Digital or
Dolby TrueHD (page 36).
About DTS signals
When playing DTS program material, using
the pause, fast forward, or fast reverse func-
tion on your player may produce a short audi-
ble noise. This is not a malfunction.
When DTS program material ends and the
DTS bitstream stops, the HTX-22HDX
remains in DTS listening mode and the DTS
indicator remains on. This is to prevent noise
when you use the pause, fast forward, or fast
reverse function on your player. If you switch
your player from DTS to PCM, as the
HTX-22HDX does not switch formats imme-
diately, you may not hear anything, in which
case you should stop your player for about 3
seconds, and then resume playback.
With some CD players, you won’t be able to
playback DTS material properly even though
your player is connected to a digital input on
the HTX-22HDX. This is usually because the
DTS bitstream has been processed (e.g., out-
put level, sampling rate, or frequency response
changed) and the HTX-22HDX doesn’t recog-
nize it as a genuine DTS signal. In such cases,
you may hear noise.
The beginning of audio received by an HDMI
IN can’t be heard
Since it takes longer to identify the format of
an HDMI signal than it does for other digital
audio signals, sound may not be output imme-
diately.
The remote controller doesn’t work
Make sure that the batteries are installed with
the correct polarity (page 12).
Make sure that the remote controller is not too
far away from the HTX-22HDX and there’s no
obstruction between the remote controller and
the HTX-22HDX’s remote control sensor
(page 12).
Can’t control other components
To control an Onkyo RI-capable component or
RI Dock with iPod that’s connected with ,
remember to point the remote controller at the
HTX-22HDX, not the other device.
How do I change the language of a multiplex
source?
On the Audio Adjust menu, change the Input
(Mux) setting to Main or Sub (page 40).
The functions don’t work
To use , you must make an connection
and an analog audio connection (RCA)
between the component and HTX-22HDX,
even if they are connected digitally (page 23).
Remote Controller
Others
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo HTX-22HDX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo HTX-22HDX in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo HTX-22HDX

Onkyo HTX-22HDX User Manual - German - 112 pages

Onkyo HTX-22HDX User Manual - French - 56 pages

Onkyo HTX-22HDX User Manual - Italian - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info