63088
25
Zoom out
Zoom in
Previous page
1/76
Next page
25
Connecting AV Components
—Continued
You can connect components with HDMI outputs to the HTX-22HD’s HDMI IN 1 and IN 2
inputs and connect your HDMI TV to the HTX-22HD’s HDMI OUT. You need HDMI cables to
make HDMI connections.
Note:
By default, the HDMI1 and HDMI2 inputs are assigned to the VCR/DVR and CBL/SAT
input selectors. To change these assignments, see “HDMI Input Setup” on page 37.
Video Signals
Digital video signals received by the HDMI IN jacks are output by the HDMI OUT for display
on your TV.
Audio Signals
Digital audio signals received by the HDMI IN jacks are output by the speakers connected to the
HTX-22HD. Normally, they are not output by the HDMI OUT.
To listen to audio received by the HDMI IN jacks through your TV’s speakers,
set the Audio TV Out setting to On (see page 68), and set your DVD player’s
HDMI audio output setting to PCM.
Notes:
Set the output resolution of your DVD player so that it matches the resolution of your TV
before starting playback.
The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and dis-
plays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that
DVI connections only carry video, so you’ll need to make a separate connection for audio.)
However, reliable operation with such an adapter is not guaranteed. In addition, video signals
from a PC are not supported.
•To listen to an HDMI source component through the HTX-22HD, you must configure your
system so that video from the HDMI source component can be displayed on your TV (i.e., on
your TV, select the HDMI input that’s connected to the HTX-22HD’s HDMI OUT). This is
necessary because a component identification check has to be performed on your TV before
an HDMI source component can output any signals. If your TV is off or set to a different
input source, the HTX-22HD may produce no sound or the sound may be distorted.
The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected
source component. If the picture is poor or there’s no sound from a component connected via
HDMI, check its setup. Refer to the connected component’s instruction manual for details.
Making HDMI Connections
Hint!
HDMIHDMI
IN 1
HDMI
IN
HDMI
OUT
DVD player
TV
: Signal frow
HTX-22HD_En.book Page 25 Monday, April 7, 2008 2:03 PM
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo HTX-22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo HTX-22 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info