462101
57
Zoom out
Zoom in
Previous page
1/172
Next page
57
En
Main menu Remote Controller Setup
Remote Mode Setup
See “Looking up for Remote Control Code”
( page 64).
With this preference, you can protect your settings by
locking the setup menus.
Main menu Lock Setup
Setup
` Locked
` Unlocked
When “Locked” is selected, the setup menus will be
locked and you cannot change any setting.
You can change various audio settings from the Home
menu ( page 39).
Note
These settings are not available in either of the following cases:
a pair of headphones is connected.
–theAudio TV Out” setting is set to “On” ( page 55).
–“HDMI Control(RIHD)” is set to “On” ( page 54) and
you’re listening through your TV speakers.
Tone Control Settings
Bass
` –10dB to 0dB
to +10dB in 2 dB steps.
You can boost or cut low-frequency sounds output
from the front speakers.
Treble
` –10dB to 0dB
to +10dB in 2 dB steps.
You can boost or cut high-frequency sounds output
from the front speakers.
You can adjust the bass and treble for the front speakers,
except when the Direct or THX listening mode is selected.
Operating on the AV receiver
Speaker Levels
Subwoofer Level
` –15dB to 0dB
to +12dB in 1 dB steps.
Center Level
` –12dB to 0dB
to +12dB in 1 dB steps.
You can adjust the volume of each speaker while listening
to an input source.
These temporary adjustments are cancelled when the AV
receiver is set to standby. To save the setting you made
here, go to “Level Calibration” ( page 45) before
setting the AV receiver to standby.
Note
You cannot use this function while the AV receiver is muted.
Speakers that are set to “No” in “Speaker Configuration”
( page 44) cannot be adjusted.
Audyssey
Audyssey
See “Audyssey” in “Source Setup” ( page 48).
Dynamic EQ
See “Dynamic EQ” in “Source Setup” ( page 48).
Dynamic Volume
See “Dynamic Volume” in “Source Setup” ( page 49).
Note
These technologies can be used when all the following
conditions are met:
Room Correction and Speaker Setup is completed. Note that
Audyssey” requires the “Audyssey 2EQ Full Calibration
method.
Any listening mode other than Direct is selected.
A pair of headphones is not connected.
The setting is stored individually for each input selector.
Remote Controller Setup
Lock Setup
Using the Audio Settings
1
Press RECEIVER followed by HOME.
2
Use q/w and ENTER to select “Audio”, and then
use q/w/e/r to make the desired selection.
1
Press TONE repeatedly to select either “Bass” or
“Treble”.
2
Use + and to adjust.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo HT-R990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo HT-R990 in the language / languages: English, French as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo HT-R990

Onkyo HT-R990 User Manual - German, Dutch, Swedish - 256 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info