535523
39
Zoom out
Zoom in
Previous page
1/52
Next page
39
En
Note
Enter the appropriate remote control code before using the AV
receiver’s remote controller for the first time ( 41).
Connect the RI Dock to the AV receiver with an u cable
( 37).
Set the RI Dock’s RI MODE switch to “HDD” orHDD/
DOCK”.
Set the AV receiver’s Input Display to “DOCK” ( 20).
System Function
System On
When you turn on the AV receiver, the ND-S1, RI Dock
and iPod turn on automatically. In addition, when the
ND-S1, RI Dock and iPod are on, the AV receiver can be
turned on by pressing ON/STANDBY.
Auto Power On
If you press the remote controller’s 1 while the AV
receiver is on Standby, the AV receiver will automatically
turn on, select your iPod as the input source, and your
iPod will start playback.
Direct Change
If you start iPod playback while listening to another input
source, the AV receiver will automatically switch to the
input to which the ND-S1 and RI Dock is connected.
Other Remote Controllers
You can use the remote controller that came with the AV
receiver to control other iPod functions. The available
functionality depends on the AV receiver.
iPod Alarm
If you use the Alarm function on your iPod to start play-
back, the AV receiver will turn on at the specified time and
select your iPod as the input source automatically.
Note
Linked operations do not work with video playback or when the
alarm is set to play a sound.
If you use your iPod with any other accessories, iPod playback
detection may not work.
This function only works when the Standard mode is set to On.
Note
On the 5th generation iPod and iPod nano, the click wheel is
disabled during playback. For ND-S1, use iPod to start and stop
playback and the remote controller to control other iPod func-
tions.
By pressing REMOTE MODE that’s been programmed
with the remote control code for your Dock, you can con-
trol your iPod in the Dock with the following buttons.
See “Entering Remote Control Codes” for details on
entering a remote control code ( 41).
See to the Dock’s instruction manual for more informa-
tion.
UP-A1 Dock
PORT is preprogrammed with the remote control code for
controlling a Dock with Universal Port connector.
You can control your iPod when “PORT” is selected as
the input source.
Without the RI Control
You must enter a remote control code 82990 first ( 41).
ND-S1
Set the ND-S1 iPod/PC mode to “iPod”.
RI Dock
Set the RI Dock’s RI MODE switch to “HDD” or
HDD/DOCK”.
ON/STANDBY may not work with a remote control
code (without u). In this case, make an u connection
and enter a remote control code 82351 (with u).
With the RI Control
In this case, make an u connection and enter a remote
control code 82351 (with u).
Set the AV receiver’s Input Display to “DOCK” ( 20).
Operating Notes
Use the AV receiver’s volume control to adjust the playback
volume.
While your iPod is inserted in the ND-S1 and RI Dock, its
volume control has no effect.
If you do adjust the volume control on your iPod while it’s
inserted in the ND-S1 and RI Dock, be careful that it’s not set
too loud before you reconnect your earphones.
Controlling Your iPod
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo HT-R538 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo HT-R538 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo HT-R538

Onkyo HT-R538 User Manual - German - 2 pages

Onkyo HT-R538 User Manual - Dutch - 104 pages

Onkyo HT-R538 User Manual - French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info