577604
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
Turning On the DX-C390
Before connecting the power cord and turning on the
DX-C390, connect all your AV components first (see
page 12).
Don’t forget to turn on your amp, and select the audio
input to which the DX-C390 is connected.
Note:
•You can turn on the DX-C390 and simultaneously
open the disc tray or start playback simply by pressing
the OPEN/CLOSE [ ] button or the PLAY [ ] but-
ton respectively. The DX-C390 will take a little longer
to come on.
Basic Playback
Notes:
The DX-C390 supports 8 cm and 12 cm discs. To
avoid damaging your discs or DX-C390, be sure to put
discs in the centers of the disc bays.
Only load discs that are supported by the DX-C390
(see page 6).
•To avoid personal injury, keep your hands away from
the disc tray as it closes.
•Always use the [ ] button to open and close the disc
tray. Never push the disc tray, and don’t touch or
obstruct it while it’s opening or closing. Don’t press
down on the disc tray while it’s open. Doing so may
damage your discs or DX-C390.
Turning On the DX-C390
1
Connect the power cord to a suit-
able wall outlet.
2
Set the [POWER] switch to the ON
position (does not apply to the
North American model).
The DX-C390 enters Standby mode, and
the STANDBY indicator comes on.
Notes:
The DX-C390 is shipped with the
[POWER] switch in the ON position.
The remote controller cannot be used
to turn on the DX-C390 while the
[POWER] switch is in the OFF posi-
tion.
3
Press the [STANDBY/ON] button
or the remote contoller’s [ON] but-
ton.
The DX-C390 comes on, the display
lights up, the disc tray light comes on,
and the STANDBY indicator goes off.
When the DX-C390 is turned on, it
checks the carousel for discs and selects
the first disc that it finds.
To set the DX-C390 to Standby, press the
[STANDBY/ON] button or the remote
controller’s [STANDBY] button.
STANDBY/ON STANDBY/ON
POWER
North American
Model
Other Models
Loading Discs
1
To open the disc tray, press the
[] button.
Put a disc, label-side up, into
each disc bay.
2
To access the other disc bays,
use the [DISC SKIP] button or the
remote controller’s DISC [+] and
[–] buttons.
3
To close the disc tray, press the
[] button again.
A circle appears around the number of
the current disc.
DISC SKIP
PLAY/PAUSE
DIMMER
Current disc
3
6
2
5
1
4
A
IN
DX-C390_En.book Page 14 Wednesday, August 27, 2003 5:49 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo DX-C390S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo DX-C390S in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo DX-C390S

Onkyo DX-C390S Installation Guide - English - 28 pages

Onkyo DX-C390S User Manual - German, Dutch - 80 pages

Onkyo DX-C390S User Manual - French, Italian - 80 pages

Onkyo DX-C390S User Manual - Swedish - 80 pages

Onkyo DX-C390S User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info