136555
65
Zoom out
Zoom in
Previous page
1/68
Next page
65
Troubleshooting
—Continued
The analog audio is OK, but there appears to be no digital audio signal.
Make sure that the Digital Out setting is set to On (page 46).
Check that the Dolby Digital, DTS and MPEG out settings (page 46) are suitable for your amplifier/receiver/check
the instruction manual that came with your amplifier/receiver.
•SACDs and some DVD-Audio discs do not output digital audio. Listen through the player’s analog audio outputs.
Noticeable difference in DVD and CD volume.
This is due to differences in the audio format and is not a malfunction.
Cannot play multichannel audio
Make sure that Audio Output Mode is set to 5.1 Channel (page 52).
Check that the Dolby Digital, DTS and MPEG Out settings (page 46) are suitable for your amplifier/receiver—check
the instruction manual that came with your amplifier/receiver.
•DVD-Audio and SACDs do not output multichannel digital audio. Listen through the player’s analog outputs.
Check that the settings in the Speaker Installation screen are correct (page 52).
Check the audio options available from the disc menu.
Cannot listen to highsampling rate audio through the digital output.
Make sure that Linear PCM Out is set to Downsample Off (page 46).
As a copy-protection measure, some DVDs do not output 96kHz audio. In this case, even if set to Downsample Off,
the player automatically outputs the audio at 48 kHz. This is not a malfunction.
Cannot output 192kHz or 176.4kHz digital audio.
The player does not output digital audio at these sampling rates. The digital output is automatically downsampled.
Cannot output 96kHz or 88.2kHz digital audio.
Check that Linear PCM Out is set to Downsample Off (page 46).
Some discs are digital copy protected and do not output high sampling rate digital audio. In this case the output is
automatically downsampled.
No DTS audio output.
If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to
DTS > PCM (page 46). If you do not do this, noise will be output when you play a DTS disc.
If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.
Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).
Make sure that Audio Output Mode is set to 2 Channel if you’ve connected to the stereo inputs on your amplifier or
TV (page 52).
DV-SP502E_En.book Page 65 Friday, July 16, 2004 3:34 PM
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dv sp 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dv sp 502 in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info