136909
14
Zoom out
Zoom in
Previous page
1/60
Next page
14
Connecting to an Amplifier
(To Enjoy the Sound Advantage of the DVD Player)
Before connecting
Refer to the instruction manual of the amplifier.
When you connect the DVD Player to the amplifier, be sure to turn off
the power and unplug both units from the mains before making any
connections. Otherwise, the speakers may be damaged.
Connect the plugs securely.
Notes
The remote controller supplied with Onkyo amplifier can be used
to operate the DVD player.
The function of the upper and lower z connectors are the same.
Connect to either one.
Connecting z cable only does not make the system operational.
You must also connect the audio cables as well.
For remote control operation, the audio connection cables must
also be connected.
Making a digital connection with the
amplifier
If your amplifier has a digital input jack, be sure to connect
it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack
on the DVD player.
Notes
DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital
receiver) which is reserved only for video disc players.
Making the analog connection with the
amplifier
If your amplifier has no digital audio input, you can make
the analog connection. If the amplifier has a Dolby Pro
Logic decoder, you can reproduce the Dolby Pro Logic
surround sound.
An amplifier with a Dolby
Digital/DTS/MPEG1/MPEG2
decoder or 2 channel digital
stereo
Although you can reproduce the DVD Players sound from the TV speakers with the connections on the opposite page,
connecting with an amplifier provides you high quality dynamic sounds.
To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an
amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.
An amplifier with no
digital connection
: Signal flow
Optical fiber connection cable
To Digital optical jack
Incomplete
Insert completely
L
MONO
R
VIDEO OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL
COAXIAL
AC
INLET
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
MODEL NO.
DV
-
SP500
DVD
PLAYER
Stereo audio
connection cable
To audio input
Coaxial connection cable
To Digital coaxial jack
z cable
To z jack
z cable
To z jack
DO NOT connect the
mains lead at this time.
Be sure to set the digital output setting after
connection using the Setup Navigator explained in
Setting Up the Player starting on page 16 or the
function setting menu explained in Adjusting
Audio and Video Settings starting on page 38.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dv sp 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dv sp 500 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info