137925
14
Zoom out
Zoom in
Previous page
1/44
Next page
14
VIDEO OUT
S VIDEO
R
L
ANALOG
OUTPUT
PCM/AC-3
DIGITAL
REMOTE
CONTROL
COAXIAL OPTICAL
YCbCr
Enjoying Dolby Digital Sound
• DO NOT connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the PCM/AC-3 DIGITAL AUDIO OUT jack of the
DVD player.
• Connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL” or “COAXIAL” input of a Dolby Digital Receiver
or Processor.
Refer to the instruction manual of the connected equipment as well.
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be
damaged.
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby
Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby
Digital soundtracks, as well as from titles with the Dolby Surround mark.
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo.
Rear speaker
(left surround)
Connection
example
Center
speaker
Rear speaker
(right surround)
Sub woofer
coaxial cable
To PCM/AC-3
DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Amplifier equipped with a
Dolby Digital decoder
TV
Front speaker
(right)
Front speaker
(left)
Standard equipment to
enjoy Dolby Digital
The DVD player (equipped
with an AC-3 output jack)
DVD video discs recorded
in Dolby Digital
6 channel amplifier
equipped with a Dolby
Digital decoder, or Dolby
Digital processor and
power amplifier
5 speakers and 1 sub
woofer
Signal flow
Video cable
To
VIDEO
OUT
Connecting to Optional Equipment
Notes:
Setting of the output
sound type
From the on-screen
displays, set the “AUDIO
OUT SEL.” to “AC-3”.
31 , 32
Select the sound recording
system of the disc to “AC-
3” on the audio setting
indication. 27
Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby,” “AC-3,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Optical digtal cable
To OPTICAL type digital audio input
To COAXIAL type
digital audio input
Connect either.
When connecting the optical digital cable, remove the cap and
fit the connector into the jack firmly. When not using the jack,
keep it capped to protect it from dust intrusion.
To video input
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dv s 501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dv s 501 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info