138959
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
Getting Started
Connections
Function Setup
Advanced Playback
Others
Basic Playback
L
R
ANALOG
OUTPUT
OPTICAL
COAXIAL
REMOTE
CONTROL
D
I
G
I
TAL
OUTPUT
REGIONAL CODE
2
VIDEO OUTPUT
VIDEO
S VIDEO
"CLASS 1 LASER
PRODUCT"
2
TV
Signal flow
Connection
example
To audio input
Front
speaker
(right)
Front
speaker
(left)
Audio cable
Amplifier equipped with
Dolby Pro Logic surround
Rear speaker
Center speaker
Other Audio Playback Options
You can enjoy high-quality surround audio playback by connecting the DV-C600 to an amplifier equipped
with a Dolby Digital, Dolby Pro Logic Surround, or DTS decoder. Furthermore you can transfer the signal
of audio CDs to your amplifier in the digital domain if it is fitted with a digital input.
See pages 10 for the video hookup of the DV-C600 to your TV set.
When using an optical digital cable, remove the cap from the DIGITAL OUTPUT OPTICAL connector and firmly fit the cable’s
jack into the connector. When not using this connector, keep it capped to protect it from dust intrusion.
Notes:
Connecting to an Amplifier Equipped with Dolby Pro Logic Surround
Your DV-C600 also supports Dolby Pro Logic Surround. This effect can be
obtained in one of two ways: via a digital or an analog connection with an
amplifier that supports Dolby Pro Logic Surround (see below).
Dolby Pro Logic Surround
Playback of Dolby Pro Logic Surround-encoded DVD video discs requires that
you connect the DV-C600 to an amplifier with right and left front speakers, a
center speaker, and one or two rear speakers.
Feel free to use one or two rear speakers. Be aware, though, that the output
sound of the rear channel will be monaural even if you connect two rear speakers.
If your amplifier is fitted with a digital input:
See the connection for Dolby Digital playback above and make the
suggested settings. See also the amplifier’s manual for how to select its
Dolby Pro Logic Surround mode.
If your amplifier has no digital input:
Connect the DV-C600’s ANALOG OUTPUTs as shown in the illustration
to the left, and make the following setting:
Setting Select: Page
Audio Out Select Analog 2ch 36
Select the Dolby Pro Logic Surround mode on your amplifier.
Note:
Do not forget to select the DVD Changers AUDIO OUTPUTs (“Analog
2ch”). See “Audio Settings” on page 36 for details.
Connecting to an Amplifier Equipped with a Dolby Digital Decoder
Playback of Dolby Digital-encoded discs requires that you establish a
digital connection with the amplifier. The selection of the DV-C600’s
DIGITAL OUTPUT depends on the type of digital input provided on your
amplifier. Use either the DIGITAL OUTPUT COAXIAL or OPTICAL
connector. See the amplifiers manual for details.
Dolby Digital
Dolby Digital is a surround sound technology used in movie theaters that
is now also available on equipment for a home environment. You can play
back motion picture and live-concert DVD video discs of this sound format
by connecting the DVD Changer to a 6-channel amplifier equipped with a
Dolby Digital decoder or Dolby Digital processor. If your amplifier (or
separate decoder) supports Dolby Pro Logic Surround, you can even play
back Dolby Pro Logic-encoded DVD movies with full 5.1-channel Dolby
Digital soundtracks, as well as titles with the Dolby Surround mark.
This functionality is only available when using DVD video discs with
Dolby Digital encoding.
Make the following settings:
Setting Select: Page
Audio Out Select Bitstream 36
Recording system 29
Select the Dolby Digital or Dolby Pro Logic Surround mode on your
amplifier.
Before connecting the DVD Changer to other equipment, be sure to turn off the power and unplug all components from the wall
outlet.
This DVD Changer outputs a very dynamic audio signal. Be sure to set the amplifier’s volume to a moderate listening level to
avoid damaging your speakers due to sudden volume surges.
Switch off the amplifier or select another input source before connecting or disconnecting the DVD Changer’s power cord. If you
leave the amplifier power on, the speakers may be damaged.
TV
Signal flow
Connection
example
To COAXIAL type
digital audio input
Front
speaker
(right)
Front
speaker
(left)
75 coaxial cable
Optical digital cable
Amplifier equipped with
a Dolby Digital decoder
Rear speaker
(left surround)
Rear speaker
(right surround)
Sub-
woofer
To OPTICAL type digital audio
input
Center speaker
L
R
ANALOG
OUTPUT
OPTICAL
COAXIAL
REMOTE
CONTROL
D
I
G
I
TAL
OUTPUT
REGIONAL CODE
2
VIDEO OUTPUT
VIDEO
S VIDEO
"CLASS 1 LASER
PRODUCT"
2
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dv c 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dv c 600 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info