60905
72
Zoom out
Zoom in
Previous page
1/84
Next page
72
Troubleshooting—Continued
The subwoofer produces no sound
When you play source material that contains no infor-
mation in the LFE channel, the subwoofer produces
no sound.
Make sure the subwoofer is configured correctly
(page 55).
Headphones makes noise or no sound
There may be a bad contact. Clean up the headphones
terminal. For information on how to clean up, see the
instruction manual attached to the headphones. Other-
wise, verify the cord of the headphones which may be
broken.
Sound Quality
The sound quality becomes stable when 10 to 30 min-
utes have passed after the power was turned on.
Using cable ties to bundle audio cables with speaker
cables may degrade the audio performance, so don’t
do it.
The Late Night function doesn’t work
Make sure the source material is Dolby Digital.
The beginning of audio received by an HDMI IN can’t
be heard
Since it takes longer to identify the format of an
HDMI signal than it does for other digital audio sig-
nals, audio output may not start immediately.
There’s no sound to your TV connected to an HDMI
OUT
You won’t hear any sound from the HDMI OUT if
your TV only supports DVI.
Change the HDMI setting on your TV to HDMI.
Your TV doesn’t support Dolby or DTS. Change the
“Digital/HDMI Audio Out” setting to “PCM”
(page 62).
Your TV doesn’t support 88.2 kHz, 96 kHz, 176.4
kHz or 196 kHz PCM. Change the “Linear PCM Out”
setting to “Down Sample On” (page 62).
The TV audio with SCART connection is strange. The
volume is too low. There’s no bass sound.
When listening to the TV audio with SCART connec-
tion, set the listening mode to “Stereo” or “Direct”.
When outputting the subwoofer’s audio from the TV,
set the “Subwfr” setting to “No” (page 55).
There’s no picture
Make sure that all video connecting plugs are pushed
in all the way (page 23).
Make sure that each video component is properly con-
nected. (pages 23-27)
If the video source is connected to an HDMI input,
your TV must be connected to the HDMI OUT
(page 27). Your TV input must be changed to HDMI.
While the Pure Audio listening mode is selected, the
video circuitry is turned off.
On your TV, make sure that the video input to which
the DVD receiver is connected is selected.
The “PAL Output Setting” is set wrong for your TV.
Change the “PAL Output Setting” to suit your TV
(page 62).
The “SCART Output Setting” is set wrong for your
TV. Make sure your TV supports the selected video
output format (page 62).
There’s no picture from a source connected to an
HDMI IN
The TV or display does not support the current video
resolution and you need to select another resolution on
your AV component.
There’s no picture to your TV connected to an HDMI
OUT
The HDMI Output Setting is set to Off or your TV
doesn’t support HDMI Resolution settings of 720p
and 1080i (page 30).
Try pressing the [HDMI] button on the front panel
repeatedly to switch the HDMI Output Setting to on,
and then pressing the [RESOLUTION] button on the
remote controller repeatedly to get picture (page 30).
If the DVD receiver is connected to your AV compo-
nent, try connecting it directly to your TV. It will not
work if you connect to a component that doesn’t sup-
port HDCP (page 27).
There’s no picture to your TV connected to an
Component Video Output
Your TV does not support progressive scanning, and
the HDMI Output Setting is on.
While the HDMI Output Setting is on, the component
video output outputs progressive video.
Try pressing the [HDMI] button on the front panel
repeatedly to switch the HDMI Output Setting to off,
and then pressing the [RESOLUTION] button repeat-
edly to switch to Interlaced (page 30).
Press the [RESOLUTION] button repeatedly to select
480p (480p/576p) (page 30).
There’s no picture to your TV connected to an
Composite Video Output
Try pressing the [RESOLUTION] button on the
remote controller repeatedly to get picture (page 22).
Video
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo DR-S501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo DR-S501 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo DR-S501

Onkyo DR-S501 User Manual - German - 158 pages

Onkyo DR-S501 User Manual - Dutch - 158 pages

Onkyo DR-S501 User Manual - Italian - 158 pages

Onkyo DR-S501 User Manual - Swedish - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info