371088
29
Zoom out
Zoom in
Previous page
1/88
Next page
2929
Speaker Setup
(North American and South American model)
You need to set up the speaker configuration for the speaker system connected to the FRONT SPEAKERS A connectors (see this
page.) (There is no speaker configuration setup for the FRONT SPEAKERS B system.)
(Other then North American and South American models)
You need to set up the speaker configuration for the speaker system connected to the SPEAKERS connectors (see page 30.)
Notes
Speaker setup cannot be done if;
Headphones are connected (see page 43), or
The FRONT SPEAKERS B system is On (North American and South American model only, see page 42).
It is not necessary to set the parameters again once you have completed the setup unless you change the speaker configuration.
1
2
Press SPEAKER A/B to select
Speaker A.
Note
Speaker B also appears by pressing the
button repeatedly, though, this setting is
reserved for future applications. Therefore, be
sure to select Speaker A.
Press SP SETUP repeatedly to
select the number of channels for
the SPEAKERS A system.
Selecting the number of speaker channels (North American and South American model)
SP SETUP
Before operating the
remote controller
Press MODE AUDIO.
The remote controller
remains in the AUDIO mode,
until another MODE button is
pressed.
SPEAKER A/B
SPEAKER
A / B
Unit only
Remote controller
only
Pressing the button repeatedly within three
seconds changes the number of channels
as follows (the corresponding speaker
configuration is described in parentheses):
Speaker 5
ch
(Front left, center, and right,
plus surround left and right
speakers)
Speaker 2
ch
(Front left and right speakers)
Speaker 3ch
(Front left, center, and right
speakers)
Speaker 4ch
(Front left and right, plus
surround left and right speakers)
The normal display resumes in three
seconds.
Speaker configuration indicator at the
upper left corner shows the current
speaker configuration.
Notes
The listening mode will automatically be set to Stereo (see
page 48) once you set or reset the number of channels.
To check the present setting while the normal display is
displayed, press SPEAKER SETUP once. To change the setting,
press the button repeatedly within three seconds.
Speaker configuration indicators indicate
current speaker configuration.
See following page for other than North American and South
American model.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dr s 2 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dr s 2 2 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info