371103
73
Zoom out
Zoom in
Previous page
1/88
Next page
73
DISPLAY
ENTER
Prog. Memory
Move
Select
Off 1 2 3
Check
Adjusting the picture quality settings
To create your own setting (2)
1 Use the cursor button (3) to select [Start] then press
ENTER.
Memory
DNR
Sharpness
Detail
Chroma Delay
Gamma
min max
min max
off max
green red
Off
On Off
123
Interlace Video Memory Select
Interlace Video Setup
<Other than European model when set to [Interlace] setting
in the Setup screen Video 1 menu and European model>
Fine Focus
Switch [On] to reveal greater detail (higher resolution) in the
picture.
Contrast
Adjusts the contrast of the elements in the picture.
Sharpness
Adjusts the sharpness of the high-frequency (detailed) elements
in the picture. (This setting is only effective when [Fine Focus] is
[On].)
Chroma Level
Adjusts how saturated colours appear.
Hue
Adjusts the overall colour balance between red and green. (This
is only effective when the DVD receiver is connected using the
VIDEO OUT or S-VIDEO OUT jacks.)
Memory (Interlace Memory)
Programs the current settings.
5 Use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
6 Repeat steps 4 and 5 to make adjustments to other
settings.
If you would like to save the settings in the DVD receivers
memory, be sure to select either [1], [2], or [3] in the [Prog.
Memory] or [Memory (Interlace Memory)] setting to establish
which memory location to save the new settings in. Please note
that if you select a location where settings have already been
saved, the old settings will be replaced by the new ones.
2 Use the cursor button () to select [Video Setup] and press
ENTER.
3 Press DISPLAY.
4 Use the cursor buttons (5/) to select the setting and use
the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
5 To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
The previous setting will be erased.
7 When you are finished making adjustments, press ENTER
to establish the new settings.
Tip
Progressive scan video has a greater scanning line density than
standard interlace video. Graininess is minimized and you can enjoy
a soft picture even with a big screen. *1
Progressive-scan compatible TVs also have on board progressive
circuits. If you prefer, choose Interlace in this units setup screen to
view progressive-scan video adjusted by the TVs on board circuits.
If the TV is incompatible with this units progressive output, picture
disturbance occurs. For this type of problem, switch this units output
to Interlace.
*1 When using a progresive-scan compatible TV.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dr l 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dr l 50 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info