370695
31
Zoom out
Zoom in
Previous page
1/68
Next page
31
Basic Operation
(Continued on next page.)
Right front speakerLeft front speaker
Center Speaker
When only the left, center, and right front speakers
are connected
The following modes are available:
DOLBY 3 STEREO
The surround channel sound is output from the left and right
front speakers.
STEREO
This is the normal stereo sound. The surround mode is
canceled.
Left front speaker Right front speaker
When only the left and right front speakers are
connected
Only STEREO is available. This is a normal stereo sound.
Available sound systems with limited speaker configurations
Changing the output sound signal format
of the DVD video/VIDEO CD/audio CD
You can change the format of the sound signal
being output via the speakers and output jacks
using the menu (see page 40).
This means, for example, even if DOLBY
DIGITAL Surround sound is played by the DVD
Receiver, you can output sound to the
speakers in the 48 kHz/16 bit format, which
enables you to use the DSP sound effects
below instead of DOLBY DIGITAL Surround.
D
O
W
N
U
P
DISPLAY TUNING
SPEAKER
SETUP
CH LEVEL
ENTER
PHONES
OFF
ON
STANDBY/ ON
MODE
FM MUTE
PRESET
MEMORY
DOWN UP STOPPAUSE PLAYOPEN/CLOSE
TREBLEBASS
PRESET /
MODE ADJ
MASTER VOLUME
POWER
Re - EQ
SURROUND
MODE
LATE NIGHT
INPUT SELECTOR
STANDBY
F M A MT VTAPE/MD
VIDEO 1 VIDEO 2 DV D
SENDING/
LEARNED
DVD RECEIVER
TV
LEVEL SETUP
TITLE MENU
SURROUND
MODE
DVD TV
ENTER
RETURN
AUDIO
TUNER
SETUP
VIDEO 1
TAPE
VIDEO 2
INPUT SELECTOR
DIMMER
SLEEP
DISPLAY
ON
STANDBY
POWER
SUBTITLE
CH SEL
LEVEL
TEST
TONE
231
564
DSP indicator
Selecting the Sound Effect
The DVD Receiver will automatically detect the sound system when DOLBY DIGITAL (
DIGITAL
) Surround, DTS ( ) Surround, or
PCM DIGITAL (2 channel digital stereo) is played back. The sound system appears in the DVD Receiver's display.
Lights up when PCM DIGITAL (2 channel digital stereo) sound is reproduced.
Lights up when DOLBY DIGITAL Surround sound is reproduced.
Lights up when DTS Surround sound is reproduced.
Using Onkyo's original sound effects – DSP (Digital Signal Processor) selection
While playing back sources other than DOLBY DIGITAL and DTS Surround sounds, you can select the desired DSP mode.
Press SURROUND MODE on the remote controller or DVD
Receiver repeatedly until the desired DSP mode appears
in the DVD Receiver's display.
The DSP indicator lights up when one of the DSP modes is selected.
Each press of the button changes the DSP mode as follows:
STEREODOLBY PRO LOGIC*ORCHESTRAUNPLUGGEDSTUDIO-MIXTV LOGIC5CH STEREO
* When only the left, center, and right front speakers are connected, or if the configurations of the other speakers are set to
"NONE," "3 STEREO" (DOLBY 3 STEREO) appears instead of "DOLBY PRO LOGIC" as above described.
When only the left and right front speakers are connected, or if the configurations of the other speakers are set to
"NONE," this selection will be skipped as above described.
Notes
When DOLBY DIGITAL Surround sound is reproduced, you can select only "DOLBY DIGITAL" or "STEREO."
When DTS Surround sound is reproduced, you can select only "DTS" or "STEREO."
SURROUND MODE
SURROUND
MODE
DVD Receiver
Remote controller
SURROUND MODE
SURROUND
MODE
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dr 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dr 90 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info