370695
18
Zoom out
Zoom in
Previous page
1/68
Next page
18
Before operating your stereo system, you need to set up
the speaker configuration and the distance from the
listening position to each speaker.
Note
It is not necessary to set the parameters again once you have
completed the setup (with one exception*) unless you change the
speaker configuration.
* See “To Listen to a High-Frequency/High-Quantization Format
Source in its Original Sound Quality – 96k Sound” on page 40.
Speaker Setup
Press SPEAKER SETUP to display
the subwoofer configuration.
The subwoofer configuration appears in
the DVD Receiver's display.
Press MODE ADJ / to select
either “YES” (when a subwoofer is
connected) or “NO” (when no
subwoofer is connected).
If you select “NO,” the configuration of the
front speakers is automatically set to
“LARGE. In this case, skip the next step
and go to step 4.
Press ENTER, then press MODE
ADJ / to select either
“LARGE” (when large–wideband–
front speakers are connected) or
“SMALL (when small–with limited
bass signal handling–front
speakers are connected).
Press ENTER, then press MODE
ADJ / to select either
“LARGE” (when a large center
speaker is connected), “SMALL
(when a small center speaker is
connected), or “NONE” (when no
center speaker is connected).
Note
If the front speaker configuration is set to
“SMALL” in step 3, “LARGE” will not appear in
this step.
Press ENTER, then press MODE
ADJ / to select either
“LARGE” (when large surround
speakers are connected), “SMALL
(when small surround speakers are
connected), or “NONE” (when no
surround speakers are connected).
Note
If the front speaker configuration is set to
“SMALL in step 3, “LARGE” will not appear in
this step.
Press ENTER, then press MODE
ADJ / repeatedly to enter the
distance between your listening
position and one of the front
speakers.
Set the value closest to the actual
distance.
The distance from the listening position
to one of the front speakers must be the
same as the distance to the other
speaker.
To increase the value, press MODE ADJ
.
To decrease the value, press MODE ADJ
.
You can select a distance between 0.3 ft.
and 30 ft. (1 and 9 m).
SPEAKER
SETUP
CH
L
MODE
2
PRESET /
MODE ADJ
3
4
5
6
ENTER
PRESET /
MODE ADJ
ENTER
PRESET /
MODE ADJ
PRESET /
MODE ADJ
PRESET /
MODE ADJ
1
D
O
W
N
U
P
DISPLAY TUNING
SPEAKER
SETUP
CH LEVEL
ENTER
PHONES
OFF
ON
STANDBY/ ON
MODE
FM MUTE
PRESET
MEMORY
DOWN UP STOPPAUSE PLAYOPEN/CLOSE
TREBLEBASS
PRESET /
MODE ADJ
MASTER VOLUME
POWER
Re - EQ
SURROUND
MODE
LATE NIGHT
INPUT SELECTOR
STANDBY
F M A MT VTAPE/MD
VIDEO 1 VIDEO 2 DV D
2-8
3-9
1
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo dr 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo dr 90 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info