601918

Onkyo CS-265 Manual

31
Zoom out
Zoom in
Previous page
1/256
Next page
En-29
Setting the Clock
1
Press the [TIMER] button repeatedly to
display “Clock.”
If the clock has not been set yet, only “Clock”
will appear.
2
Press the [ENTER] button.
3
Press the [ ]/[ ] buttons to set the day of
the week, then press the [ENTER] button.
4
Press the [ ]/[ ] buttons to set the hour,
then press the [ENTER] button.
To switch between 24-hour and 12-hour display,
press the [DISPLAY] button.
5
Press the [ ]/[ ] buttons to set the minute,
then press the [ENTER] button.
When you press the [ENTER] button, clock count
starts from 00 seconds.
Displaying the clock time
If the CD receiver is in standby mode, press the
[CLOCK CALL] button. The clock time appears on the
display for about 8 seconds. While the CD receiver is
turned on, press the [CLOCK CALL] button. The clock
time is displayed continuously.
Note:
• If a power outage occurs, the clock will stop and
“-- : --” will appear. Also, all programmed timers will
be canceled. Set the clock again, and turn on the
necessary timers.
Using the Timer
The CD receiver features a sleep timer that places the
unit into power standby mode after a specified period of
time. It also features four programmable timers that
initiate playback of a specified source at a specified
volume level at a specified time.
When the sleep timer is enabled, the CD receiver will
enter power standby mode after a specified period of
time.
1
While the power to the CD receiver is on,
press the [SLEEP] button.
“Sleep 90” appears for about 8 seconds, then the
unit will enter power standby mode in 90 minutes.
While the sleep timer is enabled, the SLEEP
indicator appears on the display.
2
While the Sleep time is displayed, press
the [SLEEP] button repeatedly to set the
desired time.
Each press of the [SLEEP] button will shorten the
sleep time in 10 minute increments.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP]
button. You can shorten the sleep time in 10 minute
increments by pressing the [SLEEP] button while the
sleep time is displayed.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button
repeatedly until “Sleep Off” appears. If you want to
power off the CD receiver immediately, press the [ ]
button.
Before programming a timer, you must set the clock.
(see page 29) Also, if you plan to program a timer for
FM, first you must preset the desired FM broadcast
stations (see page 26).
1
Press the [TIMER] button repeatedly to
select a timer number (1–4).
If only “Clock” appears, the clock has not been
set yet. Set the clock first (see page 29).
2
Use the buttons to select “On”,
then press the [ENTER] button.
This manual describes the procedure for using the
remote controller, unless otherwise specified.
Mon Tue Wed Thu Fri Sat Sun
This manual describes the procedure for using the
remote controller, unless otherwise specified.
Using the Sleep Timer
Programming a Timer
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CS-265 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CS-265 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info