601918
19
Zoom out
Zoom in
Previous page
1/256
Next page
En-17
Basic Operations
Press the [ ] button.
You can also use the [
] button on the CD receiver.
The CD receiver is turned on, and the display lights up.
Press the button again to turn it off (standby mode).
If your iPod/iPhone/iPad is connected to the CD
receiver in standby mode, “Charging” will appear on
the display of the CD receiver and the iPod/iPhone/iPad
will be charged.
With the Auto Standby function, you can set the CD
receiver so that it will be automatically turned off and
enter standby mode if there is no operation or audio
input for 20 minutes.
Auto Standby” blinks one minute before the Auto
Standby function causes the unit to enter standby mode.
Note:
If FM Mono is selected, the Auto Standby function
will be disabled.
1
Enter standby mode
2
Press the [MENU] button.
Auto Standby>” will appear on the CD receiver's
display.
3
Press the [ENTER] button, then use the
[
]/[ ] buttons to select “On.
4
Press the [ENTER] button.
To disable the Auto Standby function, select “Off” in
step 3.
You can select CD, USB, , TUNER, or LINE which
can be an external component.
To select the input source, use the remote controller’s
Input Selector buttons.
On the CD receiver, press the [INPUT] button
repeatedly. The input sources are selected in the
following order.
To adjust the volume, use the VOLUME [+]/[–]
buttons.
You can also use the CD receiver’s [+]/[–] buttons.
You can adjust the volume level in a range from 0 to 41,
and Max.
Press the [MUTING] button.
“Muting” appears on the display for a few seconds. The
MUTING indicator flashes continuously while the CD
receiver is muted. Press the button to unmute.
Tip:
You can also unmute the unit by adjusting the
volume.
Alternatively, set the unit to standby, then turn it on
again to cancel muting.
You can connect a pair of stereo headphones (ø3.5 mm,
1/8-inch phone plug) to the receiver’s headphones [ ]
jack for private listening.
Note:
Always turn down the volume before connecting your
headphones.
While the headphones plug is inserted in the
headphones [ ] jack, the speakers are turned off.
1
Press the [TONE] button repeatedly to
select “Bass” or “Treble.
If S.Bass1 or S.Bass2 is selected, S.Bass will be
turned off, and Bass and Treble will recall the
characteristics you set before.
2
Use the [ ]/[ ] buttons to adjust the bass
or treble.
You can adjust the bass and treble in a range from
–4 to +4.
3
Press the [ENTER] button to revert to the
previous display.
Note:
S.Bass cannot be simultaneously enabled with Bass
and Treble.
If you press the [TONE] button, S.Bass will be set to
off and the settings for Bass and Treble will become
effective.
This manual describes the procedure for using the
remote controller, unless otherwise specified.
Turning On the CD receiver
Setting the Auto Standby Function
Selecting the Input Source
FM
USB/iPod LINECD
Bluetooth
Adjusting the Volume
Muting the CD receiver
Using Headphones
Adjusting the Bass and Treble
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CS-265 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CS-265 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info