Manual Onkyo CS-245BT (page 27 of 36) (English)

549883

Zoom out

Zoom in

1/36

Using the Timer—Continued

Once a timer has been programmed, you can turn it on or

off as necessary. For example, while you’re on holiday,

you may want to turn off the timer you use as an early

morning alarm.

Press the [TIMER] button repeatedly until

“Timer On” or “Timer Off” appears.

Use the arrow [q]/[w] buttons to select

either “Timer On” (set) or “Timer Off”

(cancel), and then press the [ENTER]

button.

If there is no operation for several seconds, the

setting will be made with the currently-shown

content, and the display will return to its previous

state.

If you specify Timer On (set), the “TIMER”

indication and the number of the selected input

source will light.

If you select Timer Off (i.e., turn off the timer), the

“TIMER” indicator will disappear.

With the sleep timer, you can set the CD receiver so that

it automatically turns off after a specified period.

Press the [SLEEP] button repeatedly to select

the required sleep time.

With the [SLEEP] button, you can set the sleep time

from 90 to 10 minutes in 10 minute steps.

When the sleep timer has been set, the SLEEP indicator

appears on the display. The sleep time appears on the

display for about 3 seconds, then the previous display

reappears.

Checking the Remaining Sleep Time

To check the remaining sleep time, press the [SLEEP]

button.

Note that if you press the [SLEEP] button while the sleep

time is being displayed, you’ll shorten the sleep time by

10 minutes.

For example if you press the [SLEEP] button and the

remaining time is shown as 55 minutes, pressing the

[SLEEP] button once again will shorten this time to 50,

and each subsequent press will shorten the time in 10

minute increments.

Canceling the Sleep Timer

To cancel the sleep timer, press the [SLEEP] button

repeatedly until “Sleep Off” appears.

Note:

• If the timer turns the power on, the “SLEEP”

indication will light. If you perform any operation, the

“SLEEP” indication will turn off. If you want to set

the SLEEP timer, you’ll need to make the setting again

after the “SLEEP” indication turns off.

When the alarm play function of the iPod connected to

the CD receiver starts playing a song, the CD receiver

will power-on and switch to the iPod input.

On your iPod, make settings for its alarm

play function.

Repeatedly press the [TIMER] button to

make the iPod alarm mode “iPodAlarmOff”

message appear.

Use the arrow [q]/[w] buttons to select

“iPodAlarmOn”, and then press the

[ENTER] button.

If there is no operation for several seconds, the

setting will be made with the currently-shown

content, and the display will return to its previous

state.

Press the On/Standby [8] button to set the

CD receiver to Standby.

When the alarm play function of the iPod begins,

the CD receiver will power-on and the input will be

switched to iPod.

Note:

• In order for the timer to work, the CD receiver must be

in standby mode.

• This function will not work if the iPod is not

connected.

• This function won’t work when the sound set for the

alarm is a built-in sound (Beep).

• This function won’t work with models on which

music files cannot be used to set the alarm sound.

Tip:

• This function will power-on the CD receiver and

switch the input to iPod when it detects a song being

played back by the iPod. If you play back a song on the

iPod without using its alarm play function, the CD

receiver will power-on and switch to the iPod input in

the same way.

Turning Timer On and Off

Using the Sleep Timer

Timer Playback using the Alarm Play

Function of your iPod

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CS-245BT in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CS-245BT

Onkyo CS-245BT User Manual - German - 68 pages

Onkyo CS-245BT User Manual - Dutch - 68 pages

Onkyo CS-245BT User Manual - French - 68 pages

Onkyo CS-245BT User Manual - Italian - 68 pages

Onkyo CS-245BT User Manual - Swedish - 68 pages

Onkyo CS-245BT User Manual - Spanish - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo CS-245BT Manual

Product: