601922
36
Zoom out
Zoom in
Previous page
1/44
Next page
36
Troubleshooting
Restoring factory default settings
If this unit does not operate properly, follow the
procedures below to restore it to the default settings that
it had when shipped new from the factory. Doing this
might correct the problem.
While the unit is on, press and hold the stop () button
and press the Í ON/STANDBY button.
Power/Remote control
The unit does not turn on.
0 Confirm that the power plug is securely plugged in to
an outlet.
0 Unplug the power cord once, wait five seconds and
then plug it in again.
“Now Initializing...” appears on the display.
0 If you turn on the unit when the input source is set to
USB or NET, it takes about 20 to 30 seconds until the
unit recognizes the input.
The unit turns off.
0 When the Auto Standby function is enabled, the unit
will enter standby automatically after a set amount of
time. See “ASb (Auto Standby)” under “Menu settings”
in “Various settings” to check the setting.
Remote control does not work.
0 Make sure the batteries have been installed with the
correct polarity (i/j).
0 If the batteries are exhausted, replace both of them
with new ones.
0 Point the remote control at the front panel of the unit
from a distance of less than about 5 m.
0 The remote control will not work if there is an
obstruction between it and the main unit. In this case,
try changing the position.
0 If a fluorescent light is near the unit, turn the light off.
0 The unit is located behind the glass doors of a audio
rack or cabinet.
Audio
There’s no sound.
0 Make sure the correct input source is selected.
0 If “MUTING” is displayed on the display, press the
MUTING button to cancel muting.
0 Make sure the speakers are connected correctly.
0 Check all connections and correct as necessary.
0 While headphones are connected, the speakers output
no sound.
0 If the headphones do not output audio, contact failure
could be the cause. See the instruction manual for the
headphones.
There is noise.
The sound quality is not good.
0 Make sure that i/j of the speaker cables are
connected correctly. Connect the speaker placed on
the left hand side to the L terminal of the unit, and
connect the right speaker to the R terminal.
0 Make sure all audio connecting plugs are pushed in all
the way.
0 Place the unit as far away as possible from TVs and
other devices that have strong magnetism.
0 If you have any devices that emit high-intensity radio
waves near the unit, such as a cellular phone that’s
being used to make a call, the unit may output noise.
0 The unit’s precision drive mechanism may emit a faint
hissing sound while reading discs during playback or
when searching for tracks. You may be able to hear
this noise in extremely quiet environments.
0 Audio performance will be at its best about 10 to 30
minutes after the unit has been turned on and had time
to warm up.
0 Using cable ties to bundle audio cables with speaker
or power cables may degrade the sound quality, so
don’t do it.
CD playback
Playback is not possible.
0 If the disc is upside down, reload it with the labeled
side up.
0 If the disc is dirty, wipe it clean.
0 If a blank disc is loaded, replace it with a disc that has
recordings on it.
Before starting the procedure
Problems may be solved by simply turning the power
on/off or disconnecting/connecting the power cord,
which is easier than working on the connection,
setting and operating procedure. Try the simple
measures on both the unit and the connected device.
CR-N765_eng.book 36 ページ 2015年3月25日 水曜日 午後5時52分
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CR-N765 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CR-N765 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CR-N765

Onkyo CR-N765 User Manual - German - 84 pages

Onkyo CR-N765 User Manual - Dutch - 84 pages

Onkyo CR-N765 User Manual - French - 84 pages

Onkyo CR-N765 User Manual - Italian - 84 pages

Onkyo CR-N765 User Manual - Swedish - 84 pages

Onkyo CR-N765 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info