492677
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
Custom Setup
The common setting for each input selector is explained
below. Go through the following steps for setup.
Tip:
You can also use the [MENU/ENTER] jog dial on the
CD receiver.
Preferences
ASb (Auto Standby)
When “Auto Standby” is set to “On”, the CD receiver
will automatically enter standby mode if there is no
operation for 30 minutes with no audio signal input.
The ASb indicator lights up when the Auto Standby
function is enabled.
Default setting: On (European models), Off (Other
models)
Update
These settings allow you to update the CD receiver’s
firmware. Do not shutdown the power of the CD receiver
while updating.
Note:
Refer to “Firmware Update” for update procedure (see
page 37).
SleepCharge
You can specify how the power is fed to your USB
device (mobile device) when the CD receiver is in
standby mode.
Note:
When the “SleepCharge” setting is set to “On”, the
power consumption slightly increases in standby
mode.
If the iPod/iPhone completely runs out of battery,
charging might not work. In that case you need to turn
the power on again.
If you disconnect the USB device while
“ReadyCharging” appears, the CD receiver does not
enter the standby mode. Press the On/Standby [8]
button to enter the standby mode again.
Only the USB port (front) can be used for charging.
Sel Change
When you connect an Onkyo u-capable component,
it’s important that you select the input source name that
matches the type of component for u to work properly.
Before operating this setting, you need to select the input
source that you want to set.
LINE1, LINE2, OPTICAL, COAXIAL
DOCK
Note:
“DOCK” can be selected for the “LINE1”, “LINE2”,
“OPTICAL”, “COAXIAL” input selector, but not at
the same time.
M.OPT (Music Optimizer)
The Music Optimizer function enhances the sound
quality of compressed music files. When set to “On”, the
M.OPT indicator lights on the CD receiver’s display.
Note:
This setting can be used only for the NET and USB
input selectors.
The Music Optimizer function only works with digital
audio input signals with a sampling rate below
48 kHz.
Setting Common Preferences
1
Press the [MENU] button, and then use the
Arrow [!]/["] buttons to select the
preference you want to change.
2
Press [ENTER].
3
Use the Arrow [#]/[$] buttons to select the
preference’s options.
4
Press [ENTER].
On
Off
Version
Displays the current version of the firmware.
Update Notice
Enable (default)
Disable
When this setting is enabled, you will be notified if a
firmware update via network is available.
CR via NET: Performs the firmware update via
Internet. Check the network
connection before updating.
CR via USB: Performs the firmware update from a
USB flash drive.
On:
(default)
If you connect USB device (mobile
device), charging will start.
“Charging” appears on the display.
Off: Your USB device (mobile device)
is not charged.
On
Off (default)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CR-N755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CR-N755 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CR-N755

Onkyo CR-N755 User Manual - German - 96 pages

Onkyo CR-N755 User Manual - Dutch - 96 pages

Onkyo CR-N755 User Manual - French - 96 pages

Onkyo CR-N755 User Manual - Italian - 96 pages

Onkyo CR-N755 User Manual - Swedish - 96 pages

Onkyo CR-N755 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info