492696
56
Zoom out
Zoom in
Previous page
1/64
Next page
56
Using USB
The CR-N1 USB interface supports hot plug-
ging, so USB cables can be connected or dis-
connected even while your Macintosh is on.
However, its recommended that you turn
down the CR-N1 volume beforehand.
Use only standard USB cables that support
high-speed transmission.
Operation cannot be guaranteed when
using USB ports that are not standard equip-
ment (e.g., USB ports on a third-party PCI
interface card).
The following procedures and screen shots
are based on Mac OS 9.0. Additional screen
shots are provided where differences exist
between operating systems.
System requirements
iMac, iBook, or Power Macintosh or Pow-
erBook with a built-in USB port.
Mac OS 9.0 or later Mac OS that supports
USB.
See your computer manual or consult your
dealer to ensure that your Macintosh com-
plies with these requirements.
Connecting the CR-N1
1 Turn on your Macintosh and wait until
the Mac OS startup is complete.
2 Connect the USB cable from the CR-N1
to a USB port on your Macintosh.
The CR-N1s USB indicator lights up. If the
USB indicator does not light, make sure
that the USB cable is connected correctly
between the CR-N1 and Macintosh.
Verifying that the CR-N1 is
recognized
After connecting the CR-N1, you should ver-
ify that it has been recognized by your Mac-
intosh.
1 Choose Apple System Proler from the
Apple menu.
2 Click the Devices & Volumes tab.
3 Verify that Burr-Brown Japan
PCM2702 is listed as a USB device, as
shown.
Note that the device list you see on your
Macintosh will no doubt be different to
that shown here due to conguration
and system differences.
Macintosh USB setup
USB indicator
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CR-N1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CR-N1 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info